[CFW 2.19/1.03.06] Custom firmware for version 1.03.06

The only thing that comes to mind is that your DLNA database could be corrupt in some way that causes problems for 1.03.06 when it starts the media scanner. Have you tried turning Content Sharing off to see if it makes a difference?
 
Re-updated to 1.03.06/2.21 and now it is behaving fine this time.
:confused:

Checking the timing and the DLNA server does indeed appear on my PC at just about the expected time so it probably was the problem.
It seems to have sorted itself now so will keep 1.03.06/2.21 on and see what happens.
It is my brother's box that only just arrived Friday - Who knows what he has been doing with the new toy ???

Thanks for the help af123
 
It's doing it again :(

Don't know how my brother has managed to make it happen but it is.

I tried disabling the DLNA server (Content Share OFF) but it just keeps crashing.
The only solution is to attach an active Ethernet cable.

Anything you want me to do before I install 1.02.32/2.21 ????

EDIT: Using WebIF Diagnostics I Reset DLNA Database.
Standby Cycle reboot with no Ethernet and it has stopped Crash/Cycle
Does that help ?

Cheers
Pete
 
Very strange - Thought it was OK with content sharing off and the DNLA Database reset but no, started crashing again.

Switched off after finding it apparently OK.
Ethernet still removed. Started again some hours later for about an hour.
I had switched it off for a 1/2hour break then when it was switched on again it started the crash cycle again.

Strange !!!
 
SMART support is Enabled
Attributes
IDNameFlagsRaw ValueValueWorstThreshTypeUpdatedWhen Failed
1 Raw_Read_Error_Rate POSR-- 120242102 117 099 006 Pre-fail Always -
3 Spin_Up_Time PO---- 0 097 097 000 Pre-fail Always -
4 Start_Stop_Count -O--CK 1142 099 099 020 Old_age Always -
5 Reallocated_Sector_Ct PO--CK 0 100 100 036 Pre-fail Always -
7 Seek_Error_Rate POSR-- 26767542 074 060 030 Pre-fail Always -
9 Power_On_Hours -O--CK 1328 099 099 000 Old_age Always -
10 Spin_Retry_Count PO--C- 0 100 100 097 Pre-fail Always -
12 Power_Cycle_Count -O--CK 571 100 100 020 Old_age Always -
184 End-to-End_Error -O--CK 0 100 100 099 Old_age Always -
187 Reported_Uncorrect -O--CK 0 100 100 000 Old_age Always -
188 Command_Timeout -O--CK 0 100 100 000 Old_age Always -
189 High_Fly_Writes -O-RCK 23 077 077 000 Old_age Always -
190 Airflow_Temperature_Cel -O---K 22 078 044 045 Old_age Always In_the_past
194 Temperature_Celsius -O---K 22 022 056 000 Old_age Always -
195 Hardware_ECC_Recovered -O-RC- 120242102 051 043 000 Old_age Always -
197 Current_Pending_Sector -O--C- 0 100 100 000 Old_age Always -
198 Offline_Uncorrectable ----C- 0 100 100 000 Old_age Offline -
199 UDMA_CRC_Error_Count -OSRCK 0 200 200 000 Old_age Always -
 
I was thinking of the file system. It would do no harm to run the disk repair stuff from the Telnet menu.
 
Can't see any flags or notes.
Abridged version of log

>>> Contents of /mnt/hd3/fix-disk.log 67.99 KiB

----------------------------------------------------------------------
Fix-disk run starting...
----------------------------------------------------------------------


Checking disk sda

Running short disk self test

No pending sectors found - skipping sector repair
Using superblock 0 on sda1
Using superblock 0 on sda2
Using superblock 0 on sda3

Checking partition /dev/sda3...
Pass 1: Checking inodes, blocks, and sizes
/dev/sda3: | | 0.9%
/dev/sda3: |= / 1.7%
/dev/sda3: |== - 3.5%
...
...
/dev/sda3: |====================================== \ 68.3%
/dev/sda3: |======================================= | 70.0%

Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
/dev/sda3: |==================================================== / 92.0%

/lost+found not found. Create? yes

Pass 4: Checking reference counts
/dev/sda3: |==================================================== - 92.1%
/dev/sda3: |==================================================== \ 92.5%
/dev/sda3: |===================================================== | 94.0%

Pass 5: Checking group summary information
/dev/sda3: |===================================================== / 95.2%
/dev/sda3: |====================================================== - 95.7%
. . .
. . .
/dev/sda3: |========================================================\ 99.2%
/dev/sda3: |========================================================| 100.0%


/dev/sda3: ***** FILE SYSTEM WAS MODIFIED *****
/dev/sda3: 13/655776 files (0.0% non-contiguous), 83433/2622611 blocks

Checking partition /dev/sda1...
Pass 1: Checking inodes, blocks, and sizes
/dev/sda1: |==== | 7.8%
/dev/sda1: |============= / 23.3%
. . .
/dev/sda1: |=================================== / 62.2%
/dev/sda1: |======================================= - 70.0%

Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
/lost+found not found. Create? yes

Pass 4: Checking reference counts
/dev/sda1: |==================================================== \ 92.3%

Pass 5: Checking group summary information
/dev/sda1: |========================================================| 99.4%
/dev/sda1: |========================================================| 100.0%


/dev/sda1: ***** FILE SYSTEM WAS MODIFIED *****
/dev/sda1: 15/65808 files (0.0% non-contiguous), 14686/263064 blocks

Checking partition /dev/sda2...
Pass 1: Checking inodes, blocks, and sizes
hmx_int_stor: | | 0.1%
hmx_int_stor: | / 0.2%
hmx_int_stor: | - 0.3%
...
...
hmx_int_stor: |================================== - 69.9%
hmx_int_stor: |================================== \ 70.0%

Pass 2: Checking directory structure
hmx_int_stor: |================================== | 70.1%
hmx_int_stor: |================================== / 71.0%
hmx_int_stor: |===================================== - 76.4%
hmx_int_stor: |========================================= \ 85.5%
hmx_int_stor: |=========================================== | 88.9%

Pass 3: Checking directory connectivity
/lost+found not found. Create? yes

Pass 4: Checking reference counts
hmx_int_stor: |============================================ / 92.1%
hmx_int_stor: |============================================ - 92.2%
...
...
hmx_int_stor: |============================================== / 94.9%
hmx_int_stor: |============================================== - 95.0%

Pass 5: Checking group summary information
hmx_int_stor: |============================================== \ 95.1%
hmx_int_stor: |============================================== | 95.2%
...
...
hmx_int_stor: |================================================\ 99.9%
hmx_int_stor: |================================================| 100.0%


hmx_int_stor: ***** FILE SYSTEM WAS MODIFIED *****
hmx_int_stor: 4729/29860704 files (0.9% non-contiguous), 11067980/119209984 blocks

----------------------------------------------------------------------
Fix-disk run ended.
----------------------------------------------------------------------

Rendered in: 0.282 seconds
Click to expand...
 
Thanks.

I'm going to install 1.02.32/2.21 and see if that stays OK (should do) so my brother can actually use it - He isn't bothered about the new iPlayer so hopefully no problems !

Cheers
 
You must log in or register to reply here.
Back
Top