Real IR code: 0x000001 0xea151000 Real IR code: 0x000001 0xea151000 Real IR code: 00000000 0xed121000 Real IR code: 0x000001 0xed121000 Real IR code: 00000000 0xec131000 Real IR code: 0x000001 0xec131000
HiI don't understand how you think that could be done. The only way to tell the handset to send in any particular mode is to do the "OK+0" routine, then press the mode number (unless somebody figures out how to connect to the handset's internals and accesses the programming interface).
Normally the Humax puts up a message on-screen to prompt for the mode number, and changes mode itself to match - but if the Humax is not operational and in view, the handset will still change mode regardless (and in that way cease to control the Humax because it is out of sync). The CF can detect the mode coming from the handset, and maybe could provide an alternative method of updating the mode the Humax is in (if/when somebody can find where the mode is stored in the database), but it cannot affect the mode the handset is in.
HiWell, what do you mean then? Specify. Inadequate questions receive inadequate answers. We have all read "remote" as meaning "the remote control" ie "handset" so far.
If you mean the Web Interface (WebIF), as has already been stated the CF can't control the mode of the Humax itself (until and unless somebody finds the relevant entry in the database, if indeed the relevant data is stored in the database and not in some other subsystem). The virtual remote on the WebIF has its mode selected via the Settings page (on the WebIf).
0X FB04 1000 = 'button 2' in mode 1 0X FB04 10FA = 'button 2' in mode 2 0X FB04 10FB = 'button 2' in mode 3 0X FB04 10FC = 'button 2' in mode 4 0X FB04 10FD = 'button 2' in mode 5 0X FB04 10DE = 'button 2' in mode 6 but 0X 8D70 10FF = 'mode set' in universal 0X 8D72 10FF = 'button 2' in universal
Hi2) the Settings >> Remote Control Settings >> Select Remote Control Mode ONLY sets the CF ir (not the Humax operating system or Remote Control)
3) When the CF ir is changed (in 2 above) it will not take effect until after a reboot