Input 2 not detected

[Tramdriver]

When resetting to manufacturer setup, the tuner wizard only detects one cable instead of two.

All cables and connexions from the LNB test out OK.

The signal to Input 2 is not detected at all.

Can anyone suggest a fix, either in settings or a physical repair?

Thank you.

 

[HugeMaximum]

A detailed visual inspection should be done first, specifically in your case the satellite sockets on the back of the box.

Try manually setting "Two Cable (Different)" in the hidden setup menu...

• On the remote, press [Menu] button
• Use up/down direction keys on remote to go to the Setup icon (looks like satellite dish)
• Press right direction key on remote to go to the section starting with "Freesat Tune" (so it's highlighted yellow)
• On the remote press [Red], [Green], [Yellow], [Blue], [Green], [Yellow], [Blue]
• Select Antenna Setting
• Change connection type to "Two Cable (Different)"
• Follow your nose from there...