No matching key for decryption

/df said:
Conceivably assumptions are being made in either the ts class, which uses the hmt program to instantiate a ts object from the filename, or in the stripts program, or both. For instance, stripts might not understand the specific format of .ts file being written.

It could be useful to show the output of hmt -p tsname for a tsname.ts that doesn't get decrypted.
Click to expand...
Thanks for the suggestion.

I've tried to do this but failed. I have used putty and SSH into the machine ok. but then I'm faced with different directories to what I see with betaftpd or a restricted subset. Can't find a way to navigate to the media folder. So I wondered if there was something in the web interface that allows commands and gave diagnostics a good look but nothing stood out to do that.

If you would be kind enough to advice how I issue the command I will do it.

I've also now got a 40 second file that will not decrypt automatically. Just need to find somewhere to upload it to.


Thanks.

Bob.
 
Black Hole said:
In case somebody hasn't said this already: WebIF Auto-Decrypt relies on the DLNA server to decrypt and output the TS. If the DLNA server won't serve the file, then auto-decrypt won't work and your stuck with manual decryption by stripts (which IIRC can be invoked using sweeper). One way to prove whether the server is unhappy with those recordings is to use a DLNA client and see what happens trying to play it.

The DLNA server could be unhappy for several reasons, not exclusively the metadata.
Click to expand...
I'm guessing you mean another box with a DLNA client?
I have several UPnP clients and servers on the network and an OPPO blueray player that lists network items as SMB UPnP NFS, it lists more than the PC but it only show SMB for the Humax. Having said that, I've not seen it show DLNA at all yet.

Is there a setting to make the DLNA server useable from the network? Just thinking perhaps something needs turning on.

Thanks.

Bob.
 
I've uploaded the 40 second file to dropbox. Very unsure if I've given access to it but this is the link..

Dropbox

www.dropbox.com www.dropbox.com
Would someone check out if they can download it please and then I'll give the box credentials to investigate it.

Thanks
Bob.
 
mightyoakbob said:
Can't find a way to navigate to the media folder.
Click to expand...
Code: 
cd "/media/My Video"
mightyoakbob said:
Is there a setting to make the DLNA server useable from the network? Just thinking perhaps something needs turning on.
Click to expand...
Settings > System > Internet Setting > Content Share On
mightyoakbob said:
Would someone check out if they can download it please and then I'll give the box credentials to investigate it.
Click to expand...
It can be downloaded but the encryption key would be required for it to be of any use.
 
xyz321 said:
Code: 
cd "/media/My Video"
Click to expand...
Oh wow. I had tried: cd /media/My Video
Wasn't surprised when it didn't work as there was no media folder from where SHH starts from.
All in the double quotes, the learning keeps coming.
xyz321 said:
Settings > System > Internet Setting > Content Share On
Click to expand...
LOL. yes that's on, thought there might be something else.
xyz321 said:
It can be downloaded but the encryption key would be required for it to be of any use.
Click to expand...
Excellent.
Serial Number: 63 7106030 00261
Encryption Key: 08eb7422b4aa36333731303630333030
Is that enough?

Thanks.

Bob.
 
Result of command : hmt -p "SkyQ Main 40secs_20211003_1034.ts
SkyQ Main 40secs SD 301 SkyQ Main 1633253677 1 633253714 SD,Unlimited Copies,ODEncrypted, 0 0 0 0 0 Valid/OK 0 0 0
 
Black Hole said:
In case somebody hasn't said this already: WebIF Auto-Decrypt relies on the DLNA server to decrypt and output the TS. If the DLNA server won't serve the file, then auto-decrypt won't work and your stuck with manual decryption by stripts (which IIRC can be invoked using sweeper). One way to prove whether the server is unhappy with those recordings is to use a DLNA client and see what happens trying to play it.

The DLNA server could be unhappy for several reasons, not exclusively the metadata.
Click to expand...
Yes but in this case is ts getkey / stripts that is failing to detect the encryption key - it is isn't get as far as attempting to use the dlna server,
 
Code: 
pvr# stripts -/ 08eb7422b4aa36333731303630333030 SkyQ\ Main\ 40secs_20211003_1034
Encryption key is INCORRECT for this recording.
Processed in: 0.50s
pvr# stripts -@ 08eb7422b4aa36333731303630333030 SkyQ\ Main\ 40secs_20211003_1034 xxx
Processed in: 145.42s
pvr#
As suspected stripts is reporting an incorrect encryption key but will successfully decrypt it.
 
xyz321 said:
As suspected stripts is reporting an incorrect encryption key but will successfully decrypt it.
Click to expand...
I have reported this on the forum several times, here is the Wiki entry :-
Code: 
-/ <key>    Check encryption key against recording. (* See NOTE Below)
    -d [level]  Increase debug level or set debug level.

* NOTE :- This option has been reported to return "Incorrect" when using the correct key

EDIT

Beta - Offline decryption utility

Assuming you are using WebIf the native encryption key is available in Settings > General Settings...
hummy.tv hummy.tv

Help required playing files from dead FOX T2

My HDR-FOX T2 dies over the weekend after a power cut. I have removed the hard disk and can access the files ok. I had loaded the custom firmware with the auto-decrypter so none of the TS files should be encrypted. My problem is that I can't manage to play these TS files on anything else. These...
hummy.tv hummy.tv
 
Last edited:
xyz321 said:
Code: 
pvr# stripts -/ 08eb7422b4aa36333731303630333030 SkyQ\ Main\ 40secs_20211003_1034
Encryption key is INCORRECT for this recording.
Processed in: 0.50s
pvr# stripts -@ 08eb7422b4aa36333731303630333030 SkyQ\ Main\ 40secs_20211003_1034 xxx
Processed in: 145.42s
pvr#
As suspected stripts is reporting an incorrect encryption key but will successfully decrypt it.
Click to expand...
Would I be right in thinking that stripts must have used a correct key otherwise it could not possibly decrypt the file?
If so, then whatever test is done on the key prior to use is making an error.

If anyone wants the .hmt file for this it's here..

Dropbox

www.dropbox.com www.dropbox.com

Thanks.

Bob.
 
Ezra Pound said:
I have reported this on the forum several times, here is the Wiki entry :-
Code: 
-/ <key>    Check encryption key against recording. (* See NOTE Below)
    -d [level]  Increase debug level or set debug level.

* NOTE :- This option has been reported to return "Incorrect" when using the correct key
Click to expand...
It worked when I tried it on a different recording prior to posting above.
 
I'm sure I have seen it working in the past, but it now consistently displays 'Incorrect' when using the correct key on the 3 HDR Fox T2s that I have
 
I just did a quick test recording using Bob's key:
Code: 
pvr# nugget cryptokey -key
08eb7422b4aa36333731303630333030
pvr# stripts -/ 08eb7422b4aa36333731303630333030 ../Films/The\ Fifth\ Element_20211003_1448
Encryption key is correct for this recording.
Processed in: 0.01s
 
After setting my system decryption key I was able to view the downloaded recording in VLC via DLNA and also decrypt the file (using chaseget), but auto-decrypt fails

I don't have time at the moment to dig into why stripts key testing is failing for some recordings
 
MymsMan said:
After setting my system decryption key I was able to view the downloaded recording in VLC via DLNA and also decrypt the file (using chaseget), but auto-decrypt fails

I don't have time at the moment to dig into why stripts key testing is failing for some recordings
Click to expand...
Thank you for that.

Bob.
 
xyz321 said:
It worked when I tried it on a different recording prior to posting above.
Click to expand...
@xyz321, Sorry for the confusion, the problem is with the Windows stripts.exe version, I have sent the exact same line e.g. :- stripts -/ 000378bd11f336333731303434393630 "input file name" (copied from the screen), to both the Windows Version and the version on the Humax itself and I am getting:- "key is INCORRECT" and "key is correct", I will change the Wiki notes
 
Last edited:
I think stripts reports an incorrect key if the result of decryption doesn't look "normal". Do you want the parameters of what constitutes normal to be widened?
 
I don't believe that the source of stripts has been shared, or am I looking in the wrong place?
 
You must log in or register to reply here.
Back
Top