No Recordings, No Disk Capacity?

[Black Hole]

I'm at a friend's, with an FVP-4000T (I think that's what the label on the bottom says). It has an RM-L08 remote handset with a FreeviewPlay button on it. Press the "recordings" button and it says there aren't any (she says there should be), but tellingly the screen display seems to say that it has zero capacity to record any.

Can anyone suggest how to diagnose? I can't see a settings button on the remote. I've power-cycled it in hope... but that does not seem to have made a difference. Where the heck are the disk utilities???

 

[Owen Smith]

I suspect you're going to have to remove the disc and add it to either a Linux box or HDR Fox T2 to run fixdisc. Given the HDR Fox T2 stayed on an older version once newer versions were found to be putting things in the FS it didn't understand, an HDR Fox T2 might be a safer bet.

 

[davey64]

I'm at a friend's, with an FVP-4000T (I think that's what the label on the bottom says). It has an RM-L08 remote handset with a FreeviewPlay button on it. Press the "recordings" button and it says there aren't any (she says there should be), but tellingly the screen display seems to say that it has zero capacity to record any.

Can anyone suggest how to diagnose? I can't see a settings button on the remote. I've power-cycled it in hope... but that does not seem to have made a difference. Where the heck are the disk utilities???

Settings on the 4000T/5000T are through the Freeview button on the remote control. From there you should be able to navigate to the Disk Check facility.
Freeview button> Settings> PVR Settings> Storage> Internal HDD. HDD Test.
The disk is pretty noisy on these models so stick your ear up close to confirm it is spinning or feel for vibrations.
Download the manual from the Humax UK website. The 4000T is two tones in colour and the 5000T is all black.

Humax

Connected Home & Car

uk.humaxdigital.com

Select Freeview Box Recorders under Category then select 4000T or 5000T and then User Manuals and download, go to page 28 for the 4000T.

 

[EEPhil]

Not likely to be helpful as it looks like the 4000T may have a disk problem but - quite often when my 5000T is switched on and recordings pressed it shows no recordings (not sure about disk status). After a short while the recordings screen disappears and then reloads with a complete list.

Unfortunately, I can't remember what I had to do when the list wouldn't reload. I suspect it involved complete removal of power for over 5 minutes, reboot, factory reset and loss of recordings.