prpr
Well-Known Member
It's changing a lower case 'i' to an upper case 'I' in three places. How hard can it be (JC)?
If it doesn't work, you are no worse off - and you can always change it back or reinstall the package.
-
The forum software that supports hummy.tv has been upgraded to XenForo 2.3!
Please bear with us as we continue to tweak things, and feel free to post any questions, issues or suggestions in the upgrade thread.
Beta [Real-time scheduling] schedule without rebooting
- Thread starter af123
- Start date
- Status
If it doesn't work, you are no worse off - and you can always change it back or reinstall the package.
4ndy
Member
Aah, I can see that now you point it out. I am having to use iPad this morning as wife off furlough and using PC for work. Sorry.
I assume I would need something beyond the capabilities of the file editor in diagnostics.
It seemed to get beyond where it was previously stuck, only to stick somewhere else.
Sent from my iPad using Tapatalk
I assume I would need something beyond the capabilities of the file editor in diagnostics.
It seemed to get beyond where it was previously stuck, only to stick somewhere else.
Sent from my iPad using Tapatalk
Black Hole
May contain traces of nut
No.
4ndy
Member
Same programmes whizzed from RS at next sync and straight into the webif schedule on the second box. I didn’t manage to catch it pending, so working as expected.
So, issue seems to be confined to HDR4 which, according to RS is communicating every 10 minutes and rs.log is looping the same error.
Both boxes are up to date. Should I start reinstalling packages. If so, which ones?
Sent from my iPad using Tapatalk
So, issue seems to be confined to HDR4 which, according to RS is communicating every 10 minutes and rs.log is looping the same error.
Both boxes are up to date. Should I start reinstalling packages. If so, which ones?
Sent from my iPad using Tapatalk
MymsMan
Ad detector
You cannot edit sqlite databases with the file editor
Just click on Open and navigate the file tree down to the /mod/sbin directory
there is no Toggle line numbers option so I am not sure what you are looking at
Use the browser search for usS to find the lines that need changing
4ndy
Member
Thank you for the guidance. I shan't attempt it on the ipad, but will give it a go later.
Sent from my SM-G950F using Tapatalk
4ndy
Member
Managed to get on PC and edit the rs_process in three places and saved. Much easier than I expected. It has now run two RS cycles, but the items are still queued. I have not done a restart as that will push them through outside of RTS.
rs.log looks very similar, apart from the top line:
Code:
5000 Stale EPG data, deferring schedule.
4999 *LATEST: 1593474000, TIME: 1594414800
4998 *Trying source service/event ID.
4997 *Schedule 28224/49700/2/81/TalkingPictures TV/1594414800/The Rocky Horror Picture Show
4996 Processing command 'schedule auto'
4995 Stale EPG data, deferring schedule.
4994 *LATEST: 1593474000, TIME: 1594414800
4993 *Trying source service/event ID.
4992 *Schedule 28224/49700/2/81/TalkingPictures TV/1594414800/The Rocky Horror Picture Show
4991 Processing command 'schedule auto'
4990 *Trying source service/event ID.
4989 *Schedule 28224/49700/2/81/TalkingPictures TV/1594414800/The Rocky Horror Picture Show
4988 Processing command 'schedule auto'
4987 at file "/mod/lib/jim/oo.tcl", line 87
4986 at file "/mod/lib/jim/oo.tcl", line 73
4985 in procedure 'svc get' called at file "/mod/lib/jim/oo.tcl", line 52
4984 in procedure '<reference.<svc____>.00000000000000000000>' called at file "/mod/webif/lib/findhsvc", line 14
4983 in procedure 'get_channel_attr_bylcn' called at file "/mod/sbin/rs_process", line 191
4982 /mod/lib/jim/oo.tcl:87: Error: can't read "usSvcid": no such variable
4981 *Trying source service/event ID.
4980 *Schedule 28224/49700/2/81/TalkingPictures TV/1594414800/The Rocky Horror Picture Show
4979 Processing command 'schedule auto'
4978 at file "/mod/lib/jim/oo.tcl", line 87
4977 at file "/mod/lib/jim/oo.tcl", line 73
4976 in procedure 'svc get' called at file "/mod/lib/jim/oo.tcl", line 52
4975 in procedure '<reference.<svc____>.00000000000000000000>' called at file "/mod/webif/lib/findhsvc", line 14
4974 in procedure 'get_channel_attr_bylcn' called at file "/mod/sbin/rs_process", line 191
4973 /mod/lib/jim/oo.tcl:87: Error: can't read "usSvcid": no such variable
4972 *Trying source service/event ID.
4971 *Schedule 28224/49700/2/81/TalkingPictures TV/1594414800/The Rocky Horror Picture Show
4970 Processing command 'schedule auto'prpr
Well-Known Member
The errors have stopped, so that has to be a good thing.
There you are you see!
Looking at those latest log entries, it seems like it's complaining about old EPG data. The timestamp relates to 29/30 June. Is your EPG service still running? Check on the WebIf Service Management page. If not, then restart it. If it is, then it might be interesting to see the output of this at a command prompt:
humax# ls -lR /mnt/hd1and then you'll probably have to reboot to get it working again.
4ndy
Member
The EPG service did show as running, but I toggled it anyway.
Not sure if it is relevant, but I do have schedchk installed on all the boxes in question.
I am unclear why the same case sensitivity would not similarly affect the other boxes.
I have waited while it completed an RS cycle. Will reboot later as nothing urgent is pending.
Not sure if it is relevant, but I do have schedchk installed on all the boxes in question.
I am unclear why the same case sensitivity would not similarly affect the other boxes.
Code:
HDR4# ls -lR /mnt/hd1
/mnt/hd1:
drwxr-xr-x 2 root root 4096 Jul 3 16:10 dvbepg
-rw-r--r-- 1 root root 8388608 Jul 3 16:11 epg.db
drwx------ 2 root root 4096 Jan 22 18:41 lost+found
/mnt/hd1/dvbepg:
-rw-r--r-- 1 root root 6386784 Jul 3 16:10 epg.dat
/mnt/hd1/lost+found:
HDR4#I have waited while it completed an RS cycle. Will reboot later as nothing urgent is pending.
Code:
000 Stale EPG data, deferring schedule.
4999 *LATEST: 1593474000, TIME: 1594414800
4998 *Trying source service/event ID.
4997 *Schedule 28224/49700/2/81/TalkingPictures TV/1594414800/The Rocky Horror Picture Show
4996 Processing command 'schedule auto'
4995 Stale EPG data, deferring schedule.
4994 *LATEST: 1593474000, TIME: 1594414800
4993 *Trying source service/event ID.
4992 *Schedule 28224/49700/2/81/TalkingPictures TV/1594414800/The Rocky Horror Picture Show
4991 Processing command 'schedule auto'
4990 Stale EPG data, deferring schedule.
4989 *LATEST: 1593474000, TIME: 1594414800
4988 *Trying source service/event ID.
4987 *Schedule 28224/49700/2/81/TalkingPictures TV/1594414800/The Rocky Horror Picture Show
4986 Processing command 'schedule auto'
4985 Stale EPG data, deferring schedule.
4984 *LATEST: 1593474000, TIME: 15944148004ndy
Member
4ndy
Member
prpr
Well-Known Member
I would probably zap the EPG databases and reboot:
Code:
/etc/init.d/S90settop shut
rm /mnt/hd1/dvbepg/epg.dat
rm /mnt/hd1/epg.db
reboot4ndy
Member
Code:
HDR4# epg last
1594422000
HDR4#
Code:
HDR4# epg -S 28224 last
Humax EPG Tool v1.2.8, by af123, 2011-2018.
Syntax: epg [options] [filters] <command>...
Options:
-b Brief output.
-d[level] Set debug level.
-f<file> Specify alternate EPG data file.
-h Show help text.
-p Parsable output (see *).
Filters: (can be specified multiple times, all must be true)
-C<CRID> Show only events with this CRID.
-D<descriptor type> Show only selected descriptor type.
-E<event id> Show only selected event.
-R<SCRID> Show only events with this Series ID.
-S<service id> Show only selected service.
-G<type> Show only records with this guidance type.
-T<content type> Show only selected content types.
-@<unix timestamp> Show only programmes at time.
-/<unix timestamp> Show only programmes on day.
-/<days> Show only programmes on day.
-=<start>:<end> Show only programmes in time period.
Commands:
dump Show a parsed summary of the EPG.
dumpraw Show raw data from the EPG.
sqldump Produce SQL statements from EPG data.
json Produce JSON formatted EPG data.
sqlitedump <file> Create SQLite database from EPG data.
now Show what is currently on.
first Show the time of the earliest record.
last Show the time of the latest record.
d78 Check for records with d78.
parse Parse the EPG, no output.
search <text> Search programme names for text.
searchall <text> Search programme names/descriptions for text.
* Parseable output is tab delimited and contains the following fields:
Service ID, Event ID, Start, Duration, Encrypted,
Title, Synopsis, Warning, Content Code, Content Type,
Event CRID, Series CRID, Recommended CRID, Guidance Mode
Content Mgmt
HDR4#
Code:
HDR4# epg -E 49700 dump
HDR4#4ndy
Member
UPDATE: the second one has fallen off and the EPG is now complete, with the programmes in question visible but not scheduled.
The scheduled reboot stuck behind the two programmes has just rebooted the box, so some of the evidence is gone, but I can retry later and see what happens The reboot was definitely after the above. I saw it happen as I was typing.
rs.log has not updated since 18:00, thought "last seen" on RS shows 6:32pm
The scheduled reboot stuck behind the two programmes has just rebooted the box, so some of the evidence is gone, but I can retry later and see what happens The reboot was definitely after the above. I saw it happen as I was typing.
rs.log has not updated since 18:00, thought "last seen" on RS shows 6:32pm
- Status