Menu version 1.07
Enter system PIN: ****
/-------------------------\
| T E L N E T M E N U |
\-------------------------/
[ Humax HDR-Fox T2 (humax) 1.03.06/2.20 ]
1 - Restart into maintenance mode.
2 - Remove web interface password.
stat - Show what the box is currently doing.
x - Exit and close connection.
diag - Run a diagnostic.
cli - System command line (advanced users).
Please select option: cli
-----------------------------------------------------------------------
Now starting a system command prompt. You can make this the default by
enabling 'Expert mode telnet server' on the web interface settings page.
-----------------------------------------------------------------------
Humax HDR-Fox T2 (humax) 1.03.06/2.20
To return to the menu, type: exit
humax# cat /tmp/modinit.log
=== Sat Jan 1 00:00:11 UTC 2000 - modinit - setup_hosts ======================= ====
=== Sat Jan 1 00:00:12 UTC 2000 - setup hosts ===========================
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.0.0 * 255.255.255.0 U 0 0 0 eth0
default 192.168.0.1 0.0.0.0 UG 0 0 0 eth0
Interface: [eth0]
IP: [192.168.0.6]
=== Sat Jan 1 00:00:12 UTC 2000 - complete ===========================
=== Sat Jan 4 13:20:48 UTC 2014 - modinit - ===========================
=== Sat Jan 4 13:20:48 UTC 2014 - diag ===========================
Filesystem Size Used Available Use% Mounted on
/dev/root 20.9M 20.9M 0 100% /
tmpfs 61.0M 28.0K 61.0M 0% /tmp
tmpfs 61.0M 0 61.0M 0% /media
/dev/mtdblock1 2.0M 568.0K 1.4M 28% /var/lib/humaxtv
/dev/mtdblock2 2.0M 1.2M 804.0K 61% /var/lib/humaxtv_backup
/dev/sda1 1011.4M 34.5M 925.6M 4% /mnt/hd1
/dev/sda2 447.6G 379.5G 45.4G 89% /mnt/hd2
/dev/sda3 9.8G 461.4M 8.9G 5% /mnt/hd3
eth0 Link encap:Ethernet HWaddr DC:D3:21:09:D2:48
inet addr:192.168.0.6 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3 errors:0 dropped:0 overruns:0 frame:0
TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:762 (762.0 B) TX bytes:664 (664.0 B)
Interrupt:16
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
PID USER VSZ STAT COMMAND
1 root 1244 S init
2 root 0 SW [migration/0]
3 root 0 SWN [ksoftirqd/0]
4 root 0 SW [migration/1]
5 root 0 SWN [ksoftirqd/1]
6 root 0 SW< [events/0]
7 root 0 SW< [events/1]
8 root 0 SW< [khelper]
9 root 0 SW< [kthread]
10 root 0 SW< [kblockd/0]
11 root 0 SW< [kblockd/1]
12 root 0 SW< [khubd]
13 root 0 SW< [kseriod]
14 root 0 SW [pdflush]
15 root 0 SW [pdflush]
16 root 0 SW< [kswapd0]
17 root 0 SW< [aio/0]
18 root 0 SW< [aio/1]
19 root 0 SW< [ata/0]
20 root 0 SW< [ata/1]
21 root 0 SW< [ata_aux]
22 root 0 SW< [scsi_eh_0]
23 root 0 SW< [scsi_eh_1]
24 root 0 SW [mtdblockd]
25 root 0 SW< [kpsmoused]
26 root 1240 S {rcS} /bin/sh /etc/init.d/rcS
71 root 0 SWN [jffs2_gcd_mtd1]
72 root 0 SWN [jffs2_gcd_mtd2]
129 nobody 936 S /usr/bin/dnsmasq
135 root 812 S N /sbin/utelnetd -l /bin/tmenu -p 23 -d -B
151 root 1244 S {S90settop} /bin/sh /etc/init.d/S90settop start
161 root 325m S /usr/bin/humaxtv
319 root 1248 S udhcpc -t 5 -T 10 -p /var/lib/humaxtv/udhcpc.eth0.pid -i eth0
338 root 840 S tinyftp -i HumaxFTP -p 0000 -c /media
379 root 1260 S < {run-and-gun} /bin/sh /etc/mdev/run-and-gun
396 root 0 SW< [kjournald]
399 root 1260 S < {run-and-gun} /bin/sh /etc/mdev/run-and-gun
427 root 1260 S < {run-and-gun} /bin/sh /etc/mdev/run-and-gun
442 root 0 SW< [kjournald]
449 root 0 SW< [kjournald]
480 root 1228 S < sleep 1
511 root 1252 R < {modinit} /bin/sh /sbin/modinit
517 root 476 R < date +%d/%m/%Y %H:%M
524 root 1236 R < ps -w
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.0.0 * 255.255.255.0 U 0 0 0 eth0
default 192.168.0.1 0.0.0.0 UG 0 0 0 eth0
=== Sat Jan 4 13:20:49 UTC 2014 - reset all ===========================
=== Sat Jan 4 13:20:49 UTC 2014 - rma ===========================
=== Sat Jan 4 13:20:49 UTC 2014 - ugprade bootmod ===========================
=== Sat Jan 4 13:20:49 UTC 2014 - setup directories ===========================
=== Sat Jan 4 13:20:49 UTC 2014 - create modenv ===========================
=== Sat Jan 4 13:20:49 UTC 2014 - create rcS ===========================
=== Sat Jan 4 13:20:50 UTC 2014 - migrate bootmod ===========================
=== Sat Jan 4 13:20:50 UTC 2014 - setup hostname ===========================
=== Sat Jan 4 13:20:50 UTC 2014 - setup hosts ===========================
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.0.0 * 255.255.255.0 U 0 0 0 eth0
default 192.168.0.1 0.0.0.0 UG 0 0 0 eth0
Interface: [eth0]
IP: [192.168.0.6]
=== Sat Jan 4 13:20:50 UTC 2014 - run init ===========================
killall: bootstrapd: no process killed
Anacron 2.3 started on 2014-01-04
Normal exit (0 jobs run)
=== Sat Jan 4 13:20:51 UTC 2014 - complete ===========================
Loading config file /mod/etc/mongoose.conf
humax# Humax HDR-Fox T2 (humax) 1.03.06/2.20
/bin/sh: syntax error: unexpected "("
humax#
humax# To return to the menu, type: exit
/bin/sh: To: not found
humax#
humax# humax# cat /tmp/modinit.log
/bin/sh: humax#: not found
humax# === Sat Jan 1 00:00:11 UTC 2000 - modinit - setup_hosts =======================
====
/bin/sh: ===: not found
humax# === Sat Jan 1 00:00:12 UTC 2000 - setup hosts ===========================
/bin/sh: ===: not found
humax# Kernel IP routing table
/bin/sh: Kernel: not found
humax# Destination Gateway Genmask Flags Metric Ref Use Iface
/bin/sh: Destination: not found
humax# 192.168.0.0 * 255.255.255.0 U 0 0 0 eth0
default 192.168.0.1 0.0.0.0 UG 0 0 0 eth0
/bin/sh: 192.168.0.0: not found
humax# default 192.168.0.1 0.0.0.0 UG 0 0 0 eth0
/bin/sh: default: not found
humax# Interface: [eth0]
/bin/sh: Interface:: not found
humax# IP: [192.168.0.6]
/bin/sh: IP:: not found
humax# === Sat Jan 1 00:00:12 UTC 2000 - complete ===========================
/bin/sh: ===: not found
humax# === Sat Jan 4 13:20:48 UTC 2014 - modinit - ===========================
/bin/sh: ===: not found
humax# === Sat Jan 4 13:20:48 UTC 2014 - diag ===========================
/bin/sh: ===: not found
humax# Filesystem Size Used Available Use% Mounted on
/dev/root 20.9M 20.9M 0 100% /
/bin/sh: Filesystem: not found
humax# /dev/root 20.9M 20.9M 0 100% /
/bin/sh: /dev/root: not found
humax# tmpfs 61.0M 28.0K 61.0M 0% /tmp
/bin/sh: tmpfs: not found
humax# tmpfs 61.0M 0 61.0M 0% /media
/bin/sh: tmpfs: not found
humax# /dev/mtdblock1 2.0M 568.0K 1.4M 28% /var/lib/humaxtv
/dev/mtdblock2 2.0M 1.2M 804.0K 61% /var/lib/humaxtv_backup
/bin/sh: /dev/mtdblock1: Permission denied
humax# /dev/mtdblock2 2.0M 1.2M 804.0K 61% /var/lib/humaxtv_backup
/bin/sh: /dev/mtdblock2: Permission denied
/dev/sda2 447.6G 379.5G 45.4G 89% /mnt/hd2
humax# /dev/sda1 1011.4M 34.5M 925.6M 4% /mnt/hd1
inet addr:192.168.0.6 Bcast:192.168.0.255 Mask:255.255.255.0/bin/sh: /dev/sda1: Permission denied
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1humax# /dev/sda2 447.6G 379.5G 45.4G 89% /mnt/hd2
RX packets:3 errors:0 dropped:0 overruns:0 frame:0/bin/sh: /dev/sda2: Permission denied
humax# /dev/sda3 9.8G 461.4M 8.9G 5% /mnt/hd3
/bin/sh: /dev/sda3: Permission denied
humax#
humax# eth0 Link encap:Ethernet HWaddr DC:D3:21:09:D2:48
/bin/sh: eth0: not found
humax# inet addr:192.168.0.6 Bcast:192.168.0.255 Mask:255.255.255.0
/bin/sh: inet: not found
humax# UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
/bin/sh: UP: not found
humax# RX packets:3 errors:0 dropped:0 overruns:0 frame:0
/bin/sh: RX:
not found
humax# TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
RX packets:0 errors:0 dropped:0 overruns:0 frame:0/bin/sh: TX: not found
humax# collisions:0 txqueuelen:1000
/bin/sh: collisions:0: not found
humax# RX bytes:762 (762.0 B) TX bytes:664 (664.0 B)
/bin/sh: syntax error: unexpected "("
humax# Interrupt:16
/bin/sh: Interrupt:16: not found
humax#
collisions:0 txqueuelen:0humax# lo Link encap:Local Loopback
/bin/sh: lo: not found
humax# inet addr:127.0.0.1 Mask:255.0.0.0
/bin/sh: inet: not found
humax# UP LOOPBACK RUNNING MTU:16436 Metric:1
/bin/sh: UP: not found
humax# RX packets:0 errors:0 dropped:0 overruns:0 frame:0
/bin/sh: RX: not found
humax# TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
/bin/sh: TX: not found
humax# collisions:0 txqueuelen:0
/bin/sh: collisions:0: not found
humax# RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
/bin/sh: syntax error: unexpected "("
humax#
humax#
humax# PID USER VSZ STAT COMMAND
/bin/sh: PID: not found
humax# 1 root 1244 S init
/bin/sh: 1: not found
humax# 2 root 0 SW [migration/0]
/bin/sh: 2: not found
humax# 3 root 0 SWN [ksoftirqd/0]
/bin/sh: 3: not found
humax# 4 root 0 SW [migration/1]
/bin/sh: 4: not found
humax# 5 root 0 SWN [ksoftirqd/1]
/bin/sh: 5: not found
humax# 6 root 0 SW< [events/0]
/bin/sh: can't open [events/0]: no such file
/bin/sh: 6: not found
humax# 7 root 0 SW< [events/1]
/bin/sh: can't open [events/1]: no such file
/bin/sh: 7: not found
humax# 8 root 0 SW< [khelper]
/bin/sh: can't open [khelper]: no such file
/bin/sh: 8: not found
humax# 9 root 0 SW< [kthread]
/bin/sh: can't open [kthread]: no such file
/bin/sh: 9: not found
humax# 10 root 0 SW< [kblockd/0]
/bin/sh: can't open [kblockd/0]: no such file
/bin/sh: 10: not found
humax# 11 root 0 SW< [kblockd/1]
/bin/sh: can't open [kblockd/1]: no such file
/bin/sh: 11: not found
humax# 12 root 0 SW< [khubd]
/bin/sh: can't open [khubd]: no such file
/bin/sh: 12: 15 root 0 SW [pdflush]not found
humax# 13 root 0 SW< [kseriod]
/bin/sh: can't open [kseriod]: no such file
/bin/sh: 13: not found
humax# 14 root 0 SW [pdflush]
/bin/sh: 14: not found
humax# 15 root 0 SW [pdflush]
/bin/sh: 15: not found
humax# 16 root 0 SW< [kswapd0]
/bin/sh: can't open [kswapd0]: no such file
/bin/sh: 16: not found
humax# 17 root 0 SW< [aio/0]
/bin/sh: can't open [aio/0]: no such file
/bin/sh: 17: not found
humax# 18 root 0 SW< [aio/1]
/bin/sh: can't open [aio/1]: no such file
/bin/sh: 18: not found
humax# 19 root 0 SW< [ata/0]
/bin/sh: can't open [ata/0]: no such file
/bin/sh: 19: not found
humax# 20 root 0 SW< [ata/1]
/bin/sh: can't open [ata/1]: no such file
/bin/sh: 20: not found
humax# 21 root 0 SW< [ata_aux]
/bin/sh: can't open [ata_aux]: no such file
/bin/sh: 21: not found
humax# 22 root 0 SW< [scsi_eh_0]
/bin/sh: can't open [scsi_eh_0]: no such file
/bin/sh: 22: not found
humax# 23 root 0 SW< [scsi_eh_1]
/bin/sh: can't open [scsi_eh_1]: no such file
/bin/sh: 23: not found
humax# 24 root 0 SW [mtdblockd]
/bin/sh: 24: not found
humax# 25 root 0 SW< [kpsmoused]
/bin/sh: can't open [kpsmoused]: no such file
/bin/sh: 25: not found
26 root 1240 S {rcS} /bin/sh /etc/init.d/rcS
humax# 26 root 1240 S {rcS} /bin/sh /etc/init.d/rcS
/bin/sh: 26: not found
humax# 71 root 0 SWN [jffs2_gcd_mtd1]
/bin/sh: 71: not found
humax# 72 root 0 SWN [jffs2_gcd_mtd2]
/bin/sh: 72: not found
humax# 129 nobody 936 S /usr/bin/dnsmasq
/bin/sh: 129: not found
humax# 135 root 812 S N /sbin/utelnetd -l /bin/tmenu -p 23 -d -B
/bin/sh 151 root 1244 S {S90settop} /bin/sh /etc/init.d/S90settop start: 135: not found
humax# 151 root 1244 S {S90settop} /bin/sh /etc/init.d/S90settop start
161 root 325m S /usr/bin/humaxtv/bin/sh: 151: not found
humax# 161 root 325m S /usr/bin/humaxtv
/bin/sh: 161: not found
humax# 319 root 1248 S udhcpc -t 5 -T 10 -p /var/lib/humaxtv/udhcpc.eth0.pid
-i eth0
/bin/sh: 319: not found
humax# 338 root 840 S tinyftp -i HumaxFTP -p 0000 -c /media
/bin/sh: 338: not found
humax# 379 root 1260 S < {run-and-gun} /bin/sh /etc/mdev/run-and-gun
/bin/sh: can't open {run-and-gun}: no such file
/bin/sh: 379: not found
humax# 396 root 0 SW< [kjournald]
/bin/sh: can't open [kjournald]: no such file
/bin/sh: 396: not found
humax# 399 root 1260 S < {run-and-gun} /bin/sh /etc/mdev/run-and-gun
/bin/sh: can't open {run-and-gun}: no such file
/bin/sh: 399: not found
humax# 427 root 1260 S < {run-and-gun} /bin/sh /etc/mdev/run-and-gun
/bin/sh: can't open {run-and-gun}: no such file
442 root 0 SW< [kjournald]/bin/sh: 427: not found
humax# 442 root 0 SW< [kjournald]
/bin/sh: can't open [kjournald]: no such file
/bin/sh: 442: not found
humax# 449 root 0 SW< [kjournald]
/bin/sh: can't open [kjournald]: no such file
480 root 1228 S < sleep 1/bin/sh: 449: not found
humax# 480 root 1228 S < sleep 1
/bin/sh: can't open sleep: no such file
/bin/sh: 480: not found
humax# 511 root 1252 R < {modinit} /bin/sh /sbin/modinit
/bin/sh: can't open {modinit}: no such file
/bin/sh: 511: not found
humax# 517 root 476 R < date +%d/%m/%Y %H:%M
/bin/sh: can't open date: no such file
/bin/sh: 517: not found
humax# 524 root 1236 R < ps -w
/bin/sh: can't open ps: no such file
/bin/sh: 524: not found
humax#
humax# Kernel IP routing table
/bin/sh: Kernel: not found
humax# Destination Gateway Genmask Flags Metric Ref Use Iface
/bin/sh: Destination: not found
humax# 192.168.0.0 * 255.255.255.0 U 0 0 0 eth0
/bin/sh: 192.168.0.0: not found
humax# default 192.168.0.1 0.0.0.0 UG 0 0 0 eth0
/bin/sh: default: not found
humax#
humax# === Sat Jan 4 13:20:49 UTC 2014 - reset all ===========================
/bin/sh: ===: not found
humax# === Sat Jan 4 13:20:49 UTC 2014 - rma ===========================
/bin/sh: ===: not found
humax# === Sat Jan 4 13:20:49 UTC 2014 - ugprade bootmod ===========================
/bin/sh: ===: not found
humax# === Sat Jan 4 13:20:49 UTC 2014 - setup directories ===========================
/bin/sh: ===: not found
humax# === Sat Jan 4 13:20:49 UTC 2014 - create modenv ===========================
/bin/sh: ===: not found
humax# === Sat Jan 4 13:20:49 UTC 2014 - create rcS ===========================
/bin/sh: ===: not found
humax# === Sat Jan 4 13:20:50 UTC 2014 - migrate bootmod ===========================
=== Sat Jan 4 13:20:50 UTC 2014 - setup hostname ===========================/bin/sh: ===: not found
humax# === Sat Jan 4 13:20:50 UTC 2014 - setup hostname ===========================
/bin/sh: ===: not found
humax# === Sat Jan 4 13:20:50 UTC 2014 - setup hosts ===========================
/bin/sh: ===: not found
humax# Kernel IP routing table
/bin/sh: Kernel: not found
humax# Destination Gateway Genmask Flags Metric Ref Use Iface
/bin/sh: Destination: not found
humax# 192.168.0.0 * 255.255.255.0 U 0 0 0 eth0
/bin/sh: 192.168.0.0: not found
humax# default 192.168.0.1 0.0.0.0 UG 0 0 0 eth0
/bin/sh: default: not found
humax# Interface: [eth0]
/bin/sh: Interface:: not found
humax# IP: [192.168.0.6]
/bin/sh: IP:: not found
humax# === Sat Jan 4 13:20:50 UTC 2014 - run init ===========================
killall: bootstrapd: no process killed/bin/sh: ===: not found
humax# killall: bootstrapd: no process killed
/bin/sh: killall:: not found
humax# Anacron 2.3 started on 2014-01-04
Normal exit (0 jobs run)/bin/sh: Anacron: not found
humax# Normal exit (0 jobs run)
/bin/sh: syntax error: unexpected "("
humax# === Sat Jan 4 13:20:51 UTC 2014 - complete ===========================
/bin/sh: ===: not found
humax# Loading config file /mod/etc/mongoose.conf
/bin/sh: Loading: not found
humax# humax