Recent content by freestyle_gus

Success! Many thanks. All working perfectly :thumbsup::thumbsup:

Thanks all. Long disk check passed without error. opkg update opkg update run still stuck at Loading... Are there further things I could try?

Hi all, I don't use the web-if very much. But it very useful for a spring clean. I logged in as usual, to be met with the usual banner (attached) and just 'loading...' it does nothing after this. I tried to re-install the web-if via telnet, but I get an error message (attached). Any advice on...

Handbrake is free, multi-platform and pretty quick :)

Happily, after a couple of reboots, things now seem to working normally.

I'm running the latest firmware with all the latest packages. HDR-FOX T2. I've noticed recently that upon going into the power options menu (to select the power saving option etc..) the machine freezes for about 5 minutes, audio and picture continue in the background but the box refuses to do...

Thanks to all the discussions on here, after a few teething problems I have got this working beautifully. Rather miraculous I must say!

Seems to have been solved by archiving off my recordings formatting the HDD and then running fix-disk successfully.

Here it is, only referring to the time out.

Sorry, the time out message is just below the line of the keyboard. It takes about 8 minutes to time out. I've tried a handful of times and the result is the same.

I suspect some symptoms I'm suffering on my HDR are down to a corrupt hard disk (choppy playback on recordings, inconsistent chase play). I'm running CF 2.15. Running the Hard Disk Diag screen via Webif shows a couple of errors. "Current pending sector" and "offline uncorrectable". The short...

On my Toshiba TV this is an HDMI handshake problem. Turning the TV off at the wall (not just remote) for about 30 seconds usually sorts it. If not, try turning both the TV and Humax off at the wall for a bit and then restart, this has worked for me. Good luck

Mine did disappear, so I deleted all that were left, rebooted, re-instated them manually and rebooted. All has been fine since :)

I believe you now need to force re-install this from the diagnostics page. I think af123 alluded on the first page of this thread, that the update breaks some things if you don't run the prepare for update script.

All good for me too.