Yes, if the tv is on and then i bring the humax out of standby then all is fine. The problem seems to be when the tv is off (for several hours) and then i bring the humax out of standby before the tv.
Apolgies but i have just remembered that i did try the humax with the auto power cycle switched off and it made no difference. Therefore it fails even if humax is on for 24hrs.
Let me explain the issue again...
- Humax on all of the time
- Switch on tv for 1st time during the day and switch to...
Hi,
I recently replaced my 2009 Panasonic tv with a 2017 Bravia. My humax is configured to auto power down/up (standby) at 0200/0700. This all worked ok with my old tv except on the odd occassion i would get a green screen when switching on my tv but this was rare.
However with the bravia it...
The answers to your questions are:
- No i am not routinely decrypting recordings
- No i do not have my nas mounted as a usb drive - see below
- To playback my recordings i go to storage (blue) on the Humax and select Network.
I browse to my nas folder with the recordings in and press ok. After...
I've installed the package (no errors) but i don't seem to see the special directory on my HDR. Is there something else i need to do first? I think this will solve all my problems if i can get the package installed and working.
I have a Synology NAS drive connected to my Humax via router. My humax can play various movies from my drive, which have been downloaded from internet. However, i recently copied recordings from my humax hdd to my nas drive to free up space but the humax will not play these until i copy them...
The PVR and TV mode buttons have to be pressed down really hard with finger nails to get a response. Other buttons mostly OK. Its over 5 years old and batteries are fine. I read somewhere that these remotes are prone to this and 5 years seems to be a better than average life for these remotes.
Hi, my RM-F04 is worn out and I hear that these remotes are prone to this. Therefore can anyone recommend a good alternative, with most and perhaps per functions than the RM-F04? I need one that controls TV, HDR, Blu-ray player etc.
Problem solved. In juggling ethernet connections around on my Router I recconnected the Humax to a duff router port, a common failure with DGN2000 routers apparently. Using a different port fixed the problem.
Is the portal down? My humax (latest custom firmware) shows the app icons but when i select any of them i just get a blank screen. It was ok when i last used it a few weeks ago. Network is ok.
Hi,
I have a Synology DS115 NAS and can't get my Humax to connect to it. I press the media button, the blue "storage" button, select "Network" and then get a "Connecting..." message but eventually I get "No server has been found". My TV can connect to my NAS ok so DNLA is working on the NAS. My...
Yes, it is version 3. I was under the impression that the custom firmware provided extra functionality rather than remove stuff like the portal. I didn't see this mentioned in the documentation? So what now - i have to uninstall custom firmware and then install new-portal but i can't have both...
Yes, if the tv is on and then i bring the humax out of standby then all is fine. The problem seems to be when the tv is off (for several hours) and then i bring the humax out of standby before the tv.
Apolgies but i have just remembered that i did try the humax with the auto power cycle switched off and it made no difference. Therefore it fails even if humax is on for 24hrs.
Let me explain the issue again...
- Humax on all of the time
- Switch on tv for 1st time during the day and switch to...
Hi,
I recently replaced my 2009 Panasonic tv with a 2017 Bravia. My humax is configured to auto power down/up (standby) at 0200/0700. This all worked ok with my old tv except on the odd occassion i would get a green screen when switching on my tv but this was rare.
However with the bravia it...
The answers to your questions are:
- No i am not routinely decrypting recordings
- No i do not have my nas mounted as a usb drive - see below
- To playback my recordings i go to storage (blue) on the Humax and select Network.
I browse to my nas folder with the recordings in and press ok. After...
I've installed the package (no errors) but i don't seem to see the special directory on my HDR. Is there something else i need to do first? I think this will solve all my problems if i can get the package installed and working.
I have a Synology NAS drive connected to my Humax via router. My humax can play various movies from my drive, which have been downloaded from internet. However, i recently copied recordings from my humax hdd to my nas drive to free up space but the humax will not play these until i copy them...
The PVR and TV mode buttons have to be pressed down really hard with finger nails to get a response. Other buttons mostly OK. Its over 5 years old and batteries are fine. I read somewhere that these remotes are prone to this and 5 years seems to be a better than average life for these remotes.
Hi, my RM-F04 is worn out and I hear that these remotes are prone to this. Therefore can anyone recommend a good alternative, with most and perhaps per functions than the RM-F04? I need one that controls TV, HDR, Blu-ray player etc.
Problem solved. In juggling ethernet connections around on my Router I recconnected the Humax to a duff router port, a common failure with DGN2000 routers apparently. Using a different port fixed the problem.
Is the portal down? My humax (latest custom firmware) shows the app icons but when i select any of them i just get a blank screen. It was ok when i last used it a few weeks ago. Network is ok.
Hi,
I have a Synology DS115 NAS and can't get my Humax to connect to it. I press the media button, the blue "storage" button, select "Network" and then get a "Connecting..." message but eventually I get "No server has been found". My TV can connect to my NAS ok so DNLA is working on the NAS. My...
Yes, it is version 3. I was under the impression that the custom firmware provided extra functionality rather than remove stuff like the portal. I didn't see this mentioned in the documentation? So what now - i have to uninstall custom firmware and then install new-portal but i can't have both...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.