Don't know where to post this so I've put it here.
New, sealed WD20EURX 2TB AV drives for £40.49 delivered or £37.25 using the TREAT8 code at the checkout. At the time of writing there are eight left:
www.ebay.co.uk/itm/115450655904
I managed to trip over the leads of my ex-Sky box...
Just bought a used early remote on ebay - the one with the translucent battery hatch strap which comes apart easily - and on out-of-the-box testing there's a funny.
All the other remotes I've got here, regardless of age and version, transmit a single IR code on pressing PVR, TV, DVD & AUDIO but...
Renaming the 'wakeConstantly?' folder under Modsettings/smb to 'wakeConstantly' seems to work as intended. But after a reboot it's back to 'wakeConstantly?' which rather defeats things. Am I missing something?
Following on from this message it looks like I may now have a read-only hard disk. I've swapped the front panel PCB back just in case there was some coding on the DTR one that caused the issue but it remains.
Symptoms are:
Files on the disk can be played
A recording appears to be being made but...
Thought it would be a good idea to get a new RM-F04 remote for the HDR-Fox T2s while they were still available.
Went for this one from eBay as it was cheaper than Humax Direct.
Ordered just before 3pm yesterday and it arrived early this morning.
Found a dumped VM-branded Cisco 8620 cable box with a 500GB HDD that I thought was worth bunging in the boot just for the drive.
The HDD is a Western Digital WD500AADS from July 2011, 3042 days powered on, a power cycle count of 173 and no reallocated or pending sectors. WD's long test returns...
I've disassembled quite a few remote controls in my time so I know what I'm doing. I've had the odd broken clip but I've not come across one like the RM-F04 remote.
They clearly has no intention of it coming apart for repair and all the clips down one side broke. So for the first time ever I've...
Got an item stuck 'RUNNING' in queued tasks after a crash while auto-decrypting. Can someone remind me how to clear it as none of the buttons work on it?
If you have an MoT due in the next month or so get it booked now.
Thanks to the six month MoT extension granted earlier this year there's now a huge number of tests due in the next three months, with some estimates being over 11 million.
I called today to book at my usual place where normally...
I've always wondered if the BT Smart Hub could be put into bridge/modem mode just like the business version as with the previous firmware 'Bridge
Mode' would briefly pop up top right on the home page before being replaced by 'BT Smart Hub Manager'.
It can. The setting is on a page hidden on...
Posted this in another thread and was told I probably need to re-enable the opkg-beta package from the command line.
A bit of hand-holding please - how do I do re-enable it?
FWIW if I try to uninstall opkg-beta I get:
>>> opkg remove opkg-beta
umount: can't umount /etc/opkg: Invalid argument...
I'd noted the HDD temperature on the main T2 had started to run a few degrees hotter over the last few months. Nothing dramatic, say a rise of 15C over ambient instead over 10C (35C vs. 30C). The fan package is installed, set to a minimum of 49% (it doesn't like 50%) so it's running all the...
Looks like I may have found the solution to Windows/SMB shares being visible from the HDR but not their content - forgive me if this has been posted elsewhere.
The clue was scanmounts.log having this:
mount: mounting //192.168.1.11/SharedMedia on /media/CASTLE failed: Cannot allocate memory
It...
I now know how to recognise the signs of a corrupt or .part file on a shared drive that the HDR doesn't like - and it doesn't seem to matter if it's mapped to the local disk or not as has been suggested.
But a few times recently the HDR has failed to see or has stopped seeing the PC with the...
I've mentioned before that dumped Sky+ boxes will usually have a perfectly good Seagate 500GB drive in them, same model as used in the HDR, albeit with a high power on time of sometimes >2000 days. I've got a stack of them here plus a 250GB one that I must do something about and every one passed...
Last night the HDR was crashing after every 170-180 seconds of uptime.
I seem to have established that it's caused by something it doesn't like - probably a filename - in a shared directory on a Windows 7 PC, connected using network-shares-automount and I'm in the process of finding out what...
Last night, after the main box had powered up as scheduled boot at 5pm and then sat doing nothing for a couple of hours, I pressed Play to bring up the time bar so I could skip back to the news. Nothing happened. Tried again. Nothing. Pause didn't work either. Oh dear, looks like an HD issue...
I've just fixed a non-working charity shop find HDR, of which possibly more anon. The CFW packages and settings have all been sorted but I can't remember where the setting is to enable the VFD mimic on the web i/f. Can someone point me in the right direction?
Don't know where to post this so I've put it here.
New, sealed WD20EURX 2TB AV drives for £40.49 delivered or £37.25 using the TREAT8 code at the checkout. At the time of writing there are eight left:
www.ebay.co.uk/itm/115450655904
I managed to trip over the leads of my ex-Sky box...
Just bought a used early remote on ebay - the one with the translucent battery hatch strap which comes apart easily - and on out-of-the-box testing there's a funny.
All the other remotes I've got here, regardless of age and version, transmit a single IR code on pressing PVR, TV, DVD & AUDIO but...
Renaming the 'wakeConstantly?' folder under Modsettings/smb to 'wakeConstantly' seems to work as intended. But after a reboot it's back to 'wakeConstantly?' which rather defeats things. Am I missing something?
Following on from this message it looks like I may now have a read-only hard disk. I've swapped the front panel PCB back just in case there was some coding on the DTR one that caused the issue but it remains.
Symptoms are:
Files on the disk can be played
A recording appears to be being made but...
Thought it would be a good idea to get a new RM-F04 remote for the HDR-Fox T2s while they were still available.
Went for this one from eBay as it was cheaper than Humax Direct.
Ordered just before 3pm yesterday and it arrived early this morning.
Found a dumped VM-branded Cisco 8620 cable box with a 500GB HDD that I thought was worth bunging in the boot just for the drive.
The HDD is a Western Digital WD500AADS from July 2011, 3042 days powered on, a power cycle count of 173 and no reallocated or pending sectors. WD's long test returns...
I've disassembled quite a few remote controls in my time so I know what I'm doing. I've had the odd broken clip but I've not come across one like the RM-F04 remote.
They clearly has no intention of it coming apart for repair and all the clips down one side broke. So for the first time ever I've...
Got an item stuck 'RUNNING' in queued tasks after a crash while auto-decrypting. Can someone remind me how to clear it as none of the buttons work on it?
If you have an MoT due in the next month or so get it booked now.
Thanks to the six month MoT extension granted earlier this year there's now a huge number of tests due in the next three months, with some estimates being over 11 million.
I called today to book at my usual place where normally...
I've always wondered if the BT Smart Hub could be put into bridge/modem mode just like the business version as with the previous firmware 'Bridge
Mode' would briefly pop up top right on the home page before being replaced by 'BT Smart Hub Manager'.
It can. The setting is on a page hidden on...
Posted this in another thread and was told I probably need to re-enable the opkg-beta package from the command line.
A bit of hand-holding please - how do I do re-enable it?
FWIW if I try to uninstall opkg-beta I get:
>>> opkg remove opkg-beta
umount: can't umount /etc/opkg: Invalid argument...
I'd noted the HDD temperature on the main T2 had started to run a few degrees hotter over the last few months. Nothing dramatic, say a rise of 15C over ambient instead over 10C (35C vs. 30C). The fan package is installed, set to a minimum of 49% (it doesn't like 50%) so it's running all the...
Looks like I may have found the solution to Windows/SMB shares being visible from the HDR but not their content - forgive me if this has been posted elsewhere.
The clue was scanmounts.log having this:
mount: mounting //192.168.1.11/SharedMedia on /media/CASTLE failed: Cannot allocate memory
It...
I now know how to recognise the signs of a corrupt or .part file on a shared drive that the HDR doesn't like - and it doesn't seem to matter if it's mapped to the local disk or not as has been suggested.
But a few times recently the HDR has failed to see or has stopped seeing the PC with the...
I've mentioned before that dumped Sky+ boxes will usually have a perfectly good Seagate 500GB drive in them, same model as used in the HDR, albeit with a high power on time of sometimes >2000 days. I've got a stack of them here plus a 250GB one that I must do something about and every one passed...
Last night the HDR was crashing after every 170-180 seconds of uptime.
I seem to have established that it's caused by something it doesn't like - probably a filename - in a shared directory on a Windows 7 PC, connected using network-shares-automount and I'm in the process of finding out what...
Last night, after the main box had powered up as scheduled boot at 5pm and then sat doing nothing for a couple of hours, I pressed Play to bring up the time bar so I could skip back to the news. Nothing happened. Tried again. Nothing. Pause didn't work either. Oh dear, looks like an HD issue...
I've just fixed a non-working charity shop find HDR, of which possibly more anon. The CFW packages and settings have all been sorted but I can't remember where the setting is to enable the VFD mimic on the web i/f. Can someone point me in the right direction?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.