-
The forum software that supports hummy.tv has been upgraded to XenForo 2.3!
Please bear with us as we continue to tweak things, and feel free to post any questions, issues or suggestions in the upgrade thread.
DTR-T1000 (YouView) Shortcomings
- Thread starter Ezra Pound
- Start date
Black Hole
May contain traces of nut
Is this where the Humax YouView box becomes more than an expensive bookend?
CPN
New Member
Looks like it! LOL!
You can hide channels now also! At last!!
I notice that the difference between "normal" channel volume and on-demand volume is still as ridiculously stupid as it always was!!!
Hi
A friend of mine has a Humax "Youview" box, and I have agreed to install it and look after it. The installation was really simple even though it can see two signal masts, which has caused me issues in the past when installing my own Humax PVRs.
I was disappointed (and surprised) to realise that it is impossible to hide channels or to skip forward/backwards in the player. The recent update sounds great (though I'd still like to be able to re-order channels into a personalised group). I plan to see my friend at the weekend and I'd like to be prepared to update the box if it hasn't been updated. I have a few questions.
Is it obvious whether the recent update has been applied?
How to apply the update manually - is it found under "settings"?
Which buttons on the remote are used for skipping backwards and forwards?
Any other advice for somebody who doesn't use the box regularly?
Thanks in advance
David
A friend of mine has a Humax "Youview" box, and I have agreed to install it and look after it. The installation was really simple even though it can see two signal masts, which has caused me issues in the past when installing my own Humax PVRs.
I was disappointed (and surprised) to realise that it is impossible to hide channels or to skip forward/backwards in the player. The recent update sounds great (though I'd still like to be able to re-order channels into a personalised group). I plan to see my friend at the weekend and I'd like to be prepared to update the box if it hasn't been updated. I have a few questions.
Is it obvious whether the recent update has been applied?
How to apply the update manually - is it found under "settings"?
Which buttons on the remote are used for skipping backwards and forwards?
Any other advice for somebody who doesn't use the box regularly?
Thanks in advance
David
Have a look at http://community.youview.com/youview/topics/software_release_october_2012
That page shows you how to tell if you have the latest software and also some of what is new.
Unless you have this update you won't be able to hide channels or skip forwards or backwards.
That page shows you how to tell if you have the latest software and also some of what is new.
Unless you have this update you won't be able to hide channels or skip forwards or backwards.
Wow - thanks for the speedy reply! The link certainly points me in the right direction. It'll be interesting to see when the box is updated. It's (obviously) a Humax box, but in use at a TalkTalk supplied house. I'm interested to understand whether the update is controlled by Humax or TalkTalk. Time will tell.
Thanks again.
Thanks again.
Neither : )
There are three components to a Youview box and each is controlled by a different party.
* - at least, according to the Youview specifications.
There are three components to a Youview box and each is controlled by a different party.
Underlying hardware software "Manufacturer Software" is managed and updated by Humax*
Platform software by Youview
and Platform configuration by your service provider.
* - at least, according to the Youview specifications.
CPN
New Member
...and from what I am understanding on the rest of the forums, there will be certain limitations as to what "TalkTalk stuff" will appear on the particular box you are talking about (so, even though your friend is a TT subscriber, because his is a generic Youview box, there will be a TT App appearing but it won't be enabled - for example) since TT use the Huawei box (not Humax) for their Youview customers. However, their box should update to the new software fine.
C
cj136uk
Youview are quite silent about this, because in their terms with sellers they must allow their apps to be accessed on any box, as long as you are using their broadband network.
BT allow humax users who bought their own box to use the vision app on the bt broadband network. of course there is a charge!
matchfacts
New Member
Is it likely that this be introduced later or is it a hardware issue?
Other Humax boxes can be changed if people have two clashing, but my clash is with a Marantz M-CR603 and I don't seem to be able to change the code on that either.
C
cj136uk
Not sure humax just make the box, youview tightly control hardware. Have you explained the issue on the youview support forum so youview are aware?
matchfacts
New Member
YouView are aware of the clash between Humax boxes and give advice on changing the non-YouView box. Unfortunately my clash is with another manufacturer. I have emailed YouView and Humax but not posted to a forum, other than this one. I'll get that done.
My (friend's) YouView received the update last night with no problems at all, courtesy of Humax, YouView and TalkTalk.
We're already looking forward to the next one with proper channel favourites. Thanks for your help.
Ray-555
New Member
A messy fix that I used to use when I had two vcr's the same was to fix (with sticky tape) a flap of Kitchen Foil above the Infrared receiver on each machine
and flip them up and down depending on which I was using as the foil blocks the signals.
You could try it if your stuck that is
C
cj136uk
Most if this list is out if date, has been worked on- now with the latest update. Can u update it to fixed or planned now?
C
cj136uk
It would be misleading to leave these on here, as the box and youview are moving on, positively.
But that could have been due to the anti youview brigade, which has gone silent now the 1000s freesat box has been proved to be less than perfect. I hear return rates are increasing!