Foxsat-HDR - New/Updated Package Download

I posted #60 in 2023 but only recently bought a TP-link wifi range extender. The extender worked with my old wifi hub but BT has changed to a new one to connect to their digital phone network. My laptop can see it but my extender can't, so neither can my TV plugged into it by cable. The installation guide recommends the Tether app but that can't see my extender. Method 2 is to connect to http://www.tplinkrepeater.net or http://192.168.0.254. Method 3 is to press the WPS button on the router. None of the methods work so I will attempt to get an answer from BT.
Wifi extenders are usually bad news. Best practice is either wifi direct to your router (or wifi base station if using a separate one) or wired ethernet to your router. I realise that's not always easy but it is worth the effort. For my parents the wifi from their broadband router was rubbish and also at a far flung corner of the house, so I disabled the router's wifi and ran wired ethernet to a separate wifi base station upstairs much more centrally located.
 
I posted #60 in 2023 but only recently bought a TP-link wifi range extender. The extender worked with my old wifi hub but BT has changed to a new one to connect to their digital phone network. My laptop can see it but my extender can't, so neither can my TV plugged into it by cable. The installation guide recommends the Tether app but that can't see my extender. Method 2 is to connect to http://www.tplinkrepeater.net or http://192.168.0.254. Method 3 is to press the WPS button on the router. None of the methods work so I will attempt to get an answer from BT.
In post #60 you state the above. Why isn’t the Foxsat-HDR connected directly to the internet so that it can download and install the various updates?
Can you temporarily use a long CAT5e cable to link the Foxsat-HDR to your network?
Or as I do use a TP-Link RE220 WiFi extender or similar. This is plugged in close to the Foxsat-HDR and connected to your Foxsat-HDR with CAT 5e cable?
Good news! I only had to press a non-obvious button on the range extender to get it to connect to the new hub. The TV plugs into it. I was able to do all the downloads and updates. Thanks very much for your help.
 
Good news! I only had to press a non-obvious button on the range extender to get it to connect to the new hub. The TV plugs into it. I was able to do all the downloads and updates. Thanks very much for your help.
Of course I should have said the TV plugs into the Humax which plugs into range extender. Its installation guide doesn't even show or mention the button.
 
I should have said the TV plugs into the Humax which plugs into range extender.
Not true. Fake nooze, fake nooze.
Its installation guide...
The TV, the Humax or the range extender?
"It", "it", "it" all over the place all the time, without knowing which "it" you are referring to. It might be obvious to you, with prior knowledge, but not to anybody else reading.
Ambiguity reigns supreme. You need lessons in writing, reading and comprehension.
 
Reasonably clear (on careful reading over several posts) "it" refers to the range extender.

Nonetheless, writing what you would say in person does not convey sufficient meaning – writing is one-way communication, but conversation is two-way and if clarification is required it can be provided at the time (often by pointing).

There is a clip from Top Gear I find particularly annoying, IIRC Jezza and Steve Coogan are discussing a Ferrari and an Aston. The conversation goes something like "that's great, but if it were my money I would have this" with no idea what they're talking about if you're not watching their gestures.

Perhaps I have an advantage – the vast majority of my communication is written not spoken, so I am well practised.

Newbies' Guide to the Forum
 
Of course I should have said the TV plugs into the Humax which plugs into range extender. Its installation guide doesn't even show or mention the button.
The Humax has no means of operating as an ethernet switch or extender, so I have no idea what you mean by this.
 
The Humax has no means of operating as an ethernet switch or extender, so I have no idea what you mean by this.
It's only got one network port, like the TV, but the guy's clueless.
He probably meant the Humax connects to the TV with HDMI (or does it have SCART as well, I can't remember?) and the Humax connects the network port to the extender.
But who knows, or cares. It's all illerevant.
 
Perhaps I have an advantage – the vast majority of my communication is written not spoken, so I am well practised.
Perhaps—but "the vast majority of my communication is written" only establishes a proportion, not how much writing practice you have in absolute terms. Someone whose communication is mostly spoken could still write far more overall.
 
It's only got one network port, like the TV, but the guy's clueless.
The Foxsat has wifi and wired ethernet if it's like the HDR Fox T2. In theory you could plug in two USB wifi adaptors leading to three network interfaces. Then it is "only" a software problem to turn the Humax into a network relay. But that's probably not what he means.
He probably meant the Humax connects to the TV with HDMI (or does it have SCART as well, I can't remember?) and the Humax connects the network port to the extender.
Indeed, but why talk about HDMI in the same context as a wifi/ethernet issue? It is irrelevant how the Foxsat video is connected to the TV.
But who knows, or cares. It's all illerevant.
The problem is if someone new comes along and reads this rubbish they may think they can do something that is impossible.
 
Back
Top