[sysmon] System Monitoring

Just using sysmon for the first time. Only just turned the Hummy on and it's reporting a temp of 120. That can't be right. Is in in Fahrenheit or Celsius?

As you may be aware this is not a factory 1TB machine. The same HDD is fitted to my Topfield and that reports a temp of about 40-45 degrees C.

Sent from my iPhone 4s using Tapatalk
 
At the moment sysmon only works on Humax fitted Hard Disk Drives, as other models report temperature differently see #16 of this thread, af123 is aware of this
 
Nope, no good for me. Shows my fan is full on (and it hasn't even been on at all yet), and a HDD temp of 85.

Here is a snapshot of the results taken a moment ago using the command: smartctl -a /dev/sda, from a Telnet session. (Sorry I don't know how to format the text correctly for easier reading):


ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 192 189 021 Pre-fail Always - 6358
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1061
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 1396
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1059
192 Power-Off_Retract_Count 0x0032 199 199 000 Old_age Always - 1057
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 2769
194 Temperature_Celsius 0x0022 097 085 000 Old_age Always - 50
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0

SMART Error Log Version: 1
No Errors Logged

So I can 'see' where the 85 comes from...
 
Give it a few minutes or remove the /mod/monitor/monitor.db file to get rid of the old broken data.
 
Posts crossed. I have removed the db file...

edit: Guess I will have to wait for a refresh as I now get an error when clicking the smartmon icon.

edit, edit: FIXED. Looking good af123, pretty flat line now at about 50 as expected. Thanks...
 
I like the Quarter speeds for the fan in the new web-if 0.9.6-5, However I think they only apply as the curve is going down e.g. the fan starts at full speed and slows before stopping, the fan will have to start at full because although it will run at a quarter speed it won't start at a quarter

fan-quarters.jpg
 
Now that sysmon is available to install via Package Management, is there any point to installing it on a HD-Fox in the future?
Are there things, other than HDD temperature, that can be monitored?
 
4291 said:
Now that sysmon is available to install via Package Management, is there any point to installing it on a HD-Fox in the future?
Are there things, other than HDD temperature, that can be monitored?
Click to expand...
Yes, I'm going to add monitoring for other things when I get time (starting with CPU load) - not sure how useful it will be but people like to see what their box is doing!
 
It would be of more interest to see that, when it is processing the tasks we ask of it. I look forward to it.
 
4291 said:
Now that sysmon is available to install via Package Management, is there any point to installing it on a HD-Fox in the future?
Are there things, other than HDD temperature, that can be monitored?
Click to expand...

I haven't managed to read any data from a USB hard disk drive yet, I get USB Bridge error but it may be possible. There are other thing that could be displayed as single pieces of data from sysmontools like number of disk read / write errors etc. but the three that spring to mind are Line 9 RAW = the number of hours the hard disk has been running, in my case over 3600 which I'm not proud of, it's far too high, Line 12 RAW Power Cycle count = 1623 and Line 194 WORSE = 56 which effectivly shows if the fan has ever failed as it shows the Highest Temerature that the Hard Disk has ever got up to in it's life

View attachment 150

EDIT
Power Cycle count is not as useful a I thought because of all the times the unit turns itself on, e.g. my count is 1623 over 469 days
 
I installed sysmon, and I get an orange rectangle with

load_source: TypeError: Error #1010

centred in it.
 
Ezra Pound said:
Could you post the results requested in #16 of this thread
Click to expand...
humax# smartctl -a /dev/sda
smartctl 5.41 2011-06-09 r3365 [7405b0-smp-linux-2.6.18-7.1] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family: Seagate Pipeline HD 5900.2
Device Model: ST31000424CS
Serial Number: 5VX1A4TJ
LU WWN Device Id: 5 000c50 02fa04f8d
Firmware Version: SC13
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Tue Apr 24 10:59:47 2012 BST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 633) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off supp
ort.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 222) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103b) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_
FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 115 100 006 Pre-fail Always -
97050983
3 Spin_Up_Time 0x0003 095 095 000 Pre-fail Always -
0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always -
826
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always -
0
7 Seek_Error_Rate 0x000f 066 060 030 Pre-fail Always -
4626413
9 Power_On_Hours 0x0032 100 100 000 Old_age Always -
289
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always -
0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always -
414
184 End-to-End_Error 0x0032 100 100 099 Old_age Always -
0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always -
0
188 Command_Timeout 0x0032 100 100 000 Old_age Always -
0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always -
0
190 Airflow_Temperature_Cel 0x0022 076 045 045 Old_age Always In_th
e_past 24 (Min/Max 24/24)
194 Temperature_Celsius 0x0022 024 055 000 Old_age Always -
24 (0 9 0 0)
195 Hardware_ECC_Recovered 0x001a 046 045 000 Old_age Always -
97050983
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always -
0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline -
0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always -
0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
 
You must log in or register to reply here.
Back
Top