What To Do with a Dead or Unwanted HDR-FOX, HD-FOX, or DTR-T1000/1010

7000 is hardly anything. Less than a year continuous.
That is why I'm surprised that I have accumulated a few of those.

Though thinking about it a bit more, I did buy 2 or 3 youview DTR-T1000 for either their pristine casings, or their bright display, so that probably hasn't helped with my HDD clutter. The maximum time for unattended switch on for a DTR-T1000 is 12 hours.
 
The maximum time for unattended switch on for a DTR-T1000 is 12 hours.
Is that before it crashes?

My last experience with a DTR-T1000 is something changed either in the broadcast signal or the internet back end and it could no longer record anything, or even watch most channels live. I foolishly gave it to a friend who thought he knew how to fix it, and a couple of years later I found out he'd thrown it in the WEE recycle in disgust. Waste of a good front panel, case, hard disc and for vertical tuners HDR Fox T2 (I have one) power supply.
 
Is that before it crashes?

My last experience with a DTR-T1000 is something changed either in the broadcast signal or the internet back end and it could no longer record anything, or even watch most channels live. I foolishly gave it to a friend who thought he knew how to fix it, and a couple of years later I found out he'd thrown it in the WEE recycle in disgust. Waste of a good front panel, case, hard disc and for vertical tuners HDR Fox T2 (I have one) power supply.
The maximum time for auto-power off, for both the old software and the 2017 re-write was 12 hours. There is and was no way of switching off auto-power off.
 
I have a Fox HDR/T2 that I am retiring and I wondered if there are any takers? It has been running well on the Customised firmware for ages, although I has seemed to get stuck in a retuning loop which I hadn't noticed as I don't really use it any more. I have removed the 4TB HDD that I upgraded it to, but everything else should be functional either as a spare unit or as a spares donor.

I will include the original remote, but you will have to excuse the interesting patina that it has acquired in the 15+ years that I have had it!

I'm happy to donate it to one of the developers/testers for free (I'll cover postage) to say thanks for such a great job on the Custom Firmware and the use I got out of it, OR if none of the Dev/Test team want it then I'll cover the postage in exchange for a £5 donation to a Prostate Cancer charity.

Do let me know as I really don't want it to be scrapped!

Steve
 
I have a Fox HDR/T2 that I am retiring and I wondered if there are any takers? It has been running well on the Customised firmware for ages, although I has seemed to get stuck in a retuning loop which I hadn't noticed as I don't really use it any more. I have removed the 4TB HDD that I upgraded it to, but everything else should be functional either as a spare unit or as a spares donor.
Assuming there's something wrong with the main board (retune loop), this amounts to a case, front panel PCB, power supply, and remote control. Might be useful to someone.

Does it have vertical or horizontal RF connectors on the rear panel? The power supply is different between those two.
 
If he's had it 15 years it's going to be the original horizontal model.
I guess "stuck in a retune loop" means it goes in to the Wizard every time. Probably correctable.

It has the Antenna In/Out pair next to each other side-by-side (horizontally). There is an internal label wiih a 2010 manufacturing date on it if that helps also.
 
It has the Antenna In/Out pair next to each other side-by-side (horizontally). There is an internal label wiih a 2010 manufacturing date on it if that helps also.
That's the original and arguably more desirable version. It's also the one that is much more common.
 
follow up to #213
I have gone through the process of loading the custom software as suggested, in order to attempt to recover mu HDU.
I now have a new problem , within 20 secs after power up the unit no longer responds the remote or the front panel buttons, so unable to do anything with the unit but watch the channel its on, and cannot verify if the HDU is usable.
Any suggestions on where I go from here or is it time to ditch the box?
 
Disconnect the hard disk and see what happens. Or restore the old standard firmware and see what happens.
 
Disconnect the hard disk and see what happens. Or restore the old standard firmware and see what happens.
Hi Again, I disconnected the Drive as suggested and the Humax box is now responding to the remote and panel buttons.
:)

Does this mean the drive is toast?
 
Back
Top