• The forum software that supports hummy.tv has been upgraded to XenForo 2.3!

    Please bear with us as we continue to tweak things, and feel free to post any questions, issues or suggestions in the upgrade thread.

Detect ads not working with ethernet loopback cable.

N

notapom

Member
Hi guys,

I'm having trouble getting detect ads to work with a loopback cable. My humax is not connected to an active network and have always had to have it plugged into an old offline router in order for detect ads to work. Recently I made a loopback cable but I can't get it to work.

At first I made one with pins 1>3, 2>6, 4>7 and 5>8.

In internet settings it says 'network disconnected', and if I try apply settings in configure Lan, it says 'network connection has failed'. If I plug back into offline router and apply settings again, I get 'network connected' and detect ads works for a short time only

I made a second plug with only 1>3 and 2>6, still fails on apply settings but does say 'network connected' in internet settings so thought it would work but it isn't.

I've read a few threads on here after searching for loopback ethernet but I'm not seeing what I am doing wrong.

Any help much appreciated.
 
I've tried both. I get network connected when allowing DHCP to set the IP and network disconnected if I try manual and set the IP to the loopback IP address.

DHCP
IP address 169.254.60.155
Netmask. 255.255.0.0
Gateway. 0.0.0 0
DNS. 0.0 0 0

Manual
IP address 127.0.0.1
Netmask. 255.255.0.0
Gateway. 0.0.0 0
DNS. 0.0 0 0
 
I would try manual with a proper address of your choice e.g. 192.168.0.1 and 255.255.255.0
Don't use the loopback address on a physical adapter (and the netmask is technically wrong - should be 255.0.0.0).
 
notapom said:
At first I made one with pins 1>3, 2>6, 4>7 and 5>8.

I made a second plug with only 1>3 and 2>6, still fails on apply settings but does say 'network connected' in internet settings so thought it would work but it isn't.
Click to expand...
Should be 1-6 & 2-3.

Black Hole said:
Methods 4 & 6 imply a network is available. Methods 1, 2, & 3 require a network connection is present, despite there being no interaction with other network devices. In the absence of an existing network connection, this can be accomplished by inserting a loop-back plug* into the Ethernet socket on the rear of the HDR-FOX. Only method 5 does not interact with a network (or the Ethernet socket) at all. * For details see https://tikkiweb.net/1997/05/make-your-own-ethernet-loopback-connector/, or buy one off eBay.
Click to expand...
 
Back again, detectads has stopped working.

When booted up last week, the Humax was on the set up screen as if it had been reset. I forget the name of this. Has happened a few times in the past. This time detectads never resumed functions.

Put ethernet cable between Humax and router and router to laptop to check settings. Everything normal. Detectads works when plugged into router. Put loopback cable back in and doesn't work. When loopback cable is in, it says network connected in Humax internet settings, content share is set to on with boot settings. Any idea why it won't work?
 
What error is detectads actually reporting? (detectads.log or auto.log depending on when invoked)
 
MymsMan said:
What error is detectads actually reporting? (detectads.log or auto.log depending on when invoked)
Click to expand...

359504/11/2023 20:28:01 RM(25505)- Matched exclusion entry BBC * - skipping ad detection
359404/11/2023 20:28:00 RM(25505)- DETECTADS: Checking /media/My Video/Survivor/Survivor_20231104_2028.ts (BBC 1 Wales HD) for channel exclusion
3593in procedure 'close' called at file "/mod/bin/chaseget", line 165
3592in procedure 'getfile' called at file "/mod/bin/chaseget", line 453
3591/mod/bin/chaseget:165: Error: child process exited abnormally
359004/11/2023 18:59:05 DA(24178)- ==DETECTADS Chase Run: /media/My Video/The Gunpowder Plot____20231104_1859.ts
358904/11/2023 18:59:05 RM(24167)- DETECTADS: Started /media/My Video/The Gunpowder Plot____20231104_1859.ts for chaserun advert detection
358804/11/2023 18:59:04 RM(24167)- DETECTADS: Checking /media/My Video/The Gunpowder Plot____20231104_1859.ts (Channel 5 HD) for channel exclusion
3587in procedure 'close' called at file "/mod/bin/chaseget", line 165
3586in procedure 'getfile' called at file "/mod/bin/chaseget", line 453
3585/mod/bin/chaseget:165: Error: child process exited abnormally
358404/11/2023 18:29:30 DA(12852)- ==DETECTADS Chase Run: /media/My Video/The Year Britain Burned_ Summer____20231104_1829.ts
358304/11/2023 18:29:30 RM(12843)- DETECTADS: Started /media/My Video/The Year Britain Burned_ Summer____20231104_1829.ts for chaserun advert detection
358204/11/2023 18:29:30 RM(12843)- DETECTADS: Checking /media/My Video/The Year Britain Burned_ Summer____20231104_1829.ts (5SELECT) for channel exclusion
3581in procedure 'close' called at file "/mod/bin/chaseget", line 165
3580in procedure 'getfile' called at file "/mod/bin/chaseget", line 453
3579/mod/bin/chaseget:165: Error: child process exited abnormally
3578in procedure 'close' called at file "/mod/bin/chaseget", line 165
3577in procedure 'getfile' called at file "/mod/bin/chaseget", line 453
3576/mod/bin/chaseget:165: Error: child process exited abnormally
357504/11/2023 18:21:31 DA(9679)- ==DETECTADS Chase Run: /media/My Video/Four in a Bed_20231104_1821.ts
357404/11/2023 18:21:31 RM(9672)- DETECTADS: Started /media/My Video/Four in a Bed_20231104_1821.ts for chaserun advert detection
357304/11/2023 18:21:30 RM(9672)- DETECTADS: Checking /media/My Video/Four in a Bed_20231104_1821.ts (More 4) for channel exclusion
3572in procedure 'close' called at file "/mod/bin/chaseget", line 165
3571in procedure 'getfile' called at file "/mod/bin/chaseget", line 453
3570/mod/bin/chaseget:165: Error: child process exited abnormally
3569in procedure 'close' called at file "/mod/bin/chaseget", line 165
3568in procedure 'getfile' called at file "/mod/bin/chaseget", line 453
3567/mod/bin/chaseget:165: Error: child process exited abnormally
3566in procedure 'close' called at file "/mod/bin/chaseget", line 165
3565in procedure 'getfile' called at file "/mod/bin/chaseget", line 453
3564/mod/bin/chaseget:165: Error: child process exited abnormally
3563in procedure 'close' called at file "/mod/bin/chaseget", line 165
3562in procedure 'getfile' called at file "/mod/bin/chaseget", line 453
3561/mod/bin/chaseget:165: Error: child process exited abnormally
3560in procedure 'close' called at file "/mod/bin/chaseget", line 165
3559in procedure 'getfile' called at file "/mod/bin/chaseget", line 453
3558/mod/bin/chaseget:165: Error: child process exited abnormally
355704/11/2023 18:18:45 DA(8443)- ==DETECTADS Chase Run: /media/My Video/Men in Black II_20231104_1818.ts
355604/11/2023 18:18:44 RM(8441)- DETECTADS: Started /media/My Video/Men in Black II_20231104_1818.ts for chaserun advert detection
355504/11/2023 18:18:44 RM(8441)- DETECTADS: Checking /media/My Video/Men in Black II_20231104_1818.ts (Film4) for channel exclusion
355404/11/2023 18:13:29 DA(6229)- ==DETECTADS Chase Run: /media/My Video/Kirstie and Phil's Love It or____20231104_1813.ts
355304/11/2023 18:13:29 RM(6221)- DETECTADS: Started /media/My Video/Kirstie and Phil's Love It or____20231104_1813.ts for chaserun advert detection
355204/11/2023 18:13:29 RM(6221)- DETECTADS: Checking /media/My Video/Kirstie and Phil's Love It or____20231104_1813.ts (Channel 4+1) for channel exclusion
355104/11/2023 18:13:08 DA(6033)- ==DETECTADS Chase Run: /media/My Video/Young Sheldon_20231104_1813.ts
355004/11/2023 18:13:07 RM(6031)- DETECTADS: Started /media/My Video/Young Sheldon_20231104_1813.ts for chaserun advert detection
354904/11/2023 18:13:07 RM(6031)- DETECTADS: Checking /media/My Video/Young Sheldon_20231104_1813.ts (E4) for channel exclusion
354804/11/2023 18:10:21 DA(4856)- ==DETECTADS Chase Run: /media/My Video/Clwb Rygbi_ Munster v Dreigiau_20231104_1810.ts
354704/11/2023 18:10:21 RM(4847)- DETECTADS: Started /media/My Video/Clwb Rygbi_ Munster v Dreigiau_20231104_1810.ts for chaserun advert detection
354604/11/2023 18:10:21 RM(4847)- DETECTADS: Checking /media/My Video/Clwb Rygbi_ Munster v Dreigiau_20231104_1810.ts (S4C HD) for channel exclusion
 
notapom said:
I can't see it in the webif. Trying to run it in telnet. Just sits on 'Running: fix-flash-packages' so unsure if it's actually doing anything.
Click to expand...
diag procedures require an active internet connection - cannot be run with loop back

Code: 
3560    in procedure 'close' called at file "/mod/bin/chaseget", line 165
3559    in procedure 'getfile' called at file "/mod/bin/chaseget", line 453
3558    /mod/bin/chaseget:165: Error: child process exited abnormally

Not sure what is causing these errors.

Can you successfully run decrypt on these recordings?
 
MymsMan said:
diag procedures require an active internet connection - cannot be run with loop back

Code: 
3560    in procedure 'close' called at file "/mod/bin/chaseget", line 165
3559    in procedure 'getfile' called at file "/mod/bin/chaseget", line 453
3558    /mod/bin/chaseget:165: Error: child process exited abnormally

Not sure what is causing these errors.

Can you successfully run decrypt on these recordings?
Click to expand...

Ahh, I don't have the ability to get the Humax online as I live away from a wired internet connection and use mobile data via a wireless hotspot. I just use an old router to connect the laptop to the Humax for the odd bit of maintenance.

Something catastrophic has happened as now I am unable to access the webIF, the screen says 'custom firmware successfully installed' and gives me options to download and install the full web interface or acces telnet menu.

I will have to take the Humax to a friend's house to reinstall webIF and packages.
 
notapom said:
I don't have the ability to get the Humax online as I live away from a wired internet connection and use mobile data via a wireless hotspot.
Click to expand...
That should work. I used to have an installation in a non-Internet household where I used a WiFi dongle on the HDR through the hotspot on my phone – and I could link my iPad to the same phone and access the WebIF through it. No need for a router in the middle (although that's an acceptable alternative if you don't have a dongle).

notapom said:
I will have to take the Humax to a friend's house to reinstall webIF and packages.
Click to expand...
You should use the Telnet menu to go into Mainenance Mode and run checkdisk – the "something catastrophic" of which you speak is (probably) disk failure and/or file system corruption and you will need to sort that out before trying to reinstall anything.
 
Black Hole said:
That should work. I used to have an installation in a non-Internet household where I used a WiFi dongle on the HDR through the hotspot on my phone – and I could link my iPad to the same phone and access the WebIF through it. No need for a router in the middle (although that's an acceptable alternative if you don't have a dongle).
Click to expand...

My Humax doesn't have wireless capabilities so I can't connect it to my phone's hotspot unfortunately. I should get a WiFi adapter for it actually. Is there one that you recommend?

Black Hole said:
You should use the Telnet menu to go into Mainenance Mode and run checkdisk – the "something catastrophic" of which you speak is (probably) disk failure and/or file system corruption and you will need to sort that out before trying to reinstall anything.
Click to expand...

I couldn't see checkdisk but running fixdisk now.
 
MymsMan said:
You can also use detectads with software decryption... this will be much slower than the hardware assisted decryption
Click to expand...
That's the point of using a loop-back in the Ethernet port – it enables hardware decryption without an actual network.
 
Black Hole said:
That's the point of using a loop-back in the Ethernet port – it enables hardware decryption without an actual network.
Click to expand...
Yes, But software decryption is a valid option for those without a loopback plug or experiencing problems with it as in this case
 
You must log in or register to reply here.
Back
Top