• The forum software that supports hummy.tv has been upgraded to XenForo 2.3!

    Please bear with us as we continue to tweak things, and feel free to post any questions, issues or suggestions in the upgrade thread.

Looks like the end is in sight for old DVB kit

prpr said:
It's HD ready, so of course it can as it will have an MPEG4 decoder (but not a DVB-T2 demodulator - that was the con with "Ready").
Click to expand...
That's a category of device I did not know existed. I was aware of HD Ready, but are you sure that means it has an MPEG4 decoder? My understanding was HD Ready just meant 1280x768 or similar screen resolution, ie more than SD but not 1920x1080 and not with DVB-T2. I always understood MPEG4 support went together with DVB-T2 and you either got both or neither.
 
Owen Smith said:
My understanding was HD Ready just meant 1280x768 or similar screen resolution, ie more than SD but not 1920x1080 and not with DVB-T2. I always understood MPEG4 support went together with DVB-T2 and you either got both or neither.
Click to expand...
My HD ready TV shows this banner on channel change:IMG_20250625_074433222_MFNR~2.jpg
 
prpr said:
It's HD ready, so of course it can as it will have an MPEG4 decoder (but not a DVB-T2 demodulator - that was the con with "Ready").
Click to expand...
Nope. See https://en.wikipedia.org/wiki/HD_ready no need for any tuner at all to meet the HD ready spec.

Many EU-wide models had the MP4 codec in DVB-T tuner TVs (such as EEPhil's set). Other makers (e.g. Panasonic) crippled their UK variants in HD Ready and/or full HD screen resolution mode so excluded it. {We had one Panny plasma with DVB-T SD Freeview and DVB-S/S2 HD Freesat inside... I wonder how that would cope

Freeview HD was when the tuner spec for -T2 became mandatory to use that label, after DTG testing, of course. Freeview HD spec still allows any TV screen resolution of course.
 
Shirley a "HD-ready" TV has to have no more than a 1280x720 (but more likely 1920x1080) screen and the ability to display 1280x720 from an HDMI input.
 
Black Hole said:
Shirley a "HD-ready" TV has to have no more than a 1280x720 (but more likely 1920x1080) screen and the ability to display 1280x720 from an HDMI input.
Click to expand...
Most HD-Ready TVs actually had 1280x768 displays. My Arcam DV137 DVD-Audio/Video upscaling player had an option to set 768p as the output video format to get 1:1 pixel display on 768p HD Ready TVs.
 
Black Hole said:
Shirley a "HD-ready" TV has to have no more than a 1280x720 (but more likely 1920x1080) screen and the ability to display 1280x720 from an HDMI input.
Click to expand...
720 rows according to wikipedia for displays... no mention of width pixel count ;)

Freeview HD stbs and pvrs will have 576i outputs for legacy TV displays (at least in the early days, some even doing analogue PAL out via scart or RCA) so pretty much screen resolution agnostic. While no TV maker would be likely to make such a resolution it's not prohibited.

As Owen says most screens were based on the common computer display 1280x768 resolution... with that still being commonplace on smaller screen TVs today.
 
You must log in or register to reply here.
Back
Top