I am now facing a new problem in that the Fox-HDR T2 goes through the procedure but does not find any stations when I do a station search. This results in no channels to play on the Humax and so the Humax can not be used to watch the TV or recordings.
If I take the aerial jack in to the Fox...
I have noticed that none of my scheduled recordings are appearing as available to view nor are they listed as being made.
Upon access via browser:
Warning HD problems /mnt/hd2 =RO
Access via telnet:
Connection refused
Space reported on HD:
Total 906GiB...
DetectAdds is not detecting and removing via chaserun all channels I have retained:
Retained channels:
Yesterday, Earthxtv, PBS America, AlJazeera eng (BBC, of course no adds to remove.)
Is DetectAds capable of removing adds from my retained channels?
I believe that the share file should...
Because I have disk problems, I have been advised in another forum, to install the customised firmware. I do not know if I have to install a later version than the one that is installed..
How do I check which version is installed?
I am unable to directly access the recorder via the lan.
As a fault-finding check I removed the Fox from its usual position in another room, and connected the Fox recorder directly to a switch box attached to my computer using a different IP cable. Amongst the device addresses shown in the...
I run ubuntu 22.04. Does anyone know how to convert a file that has been downloaded from the DVR and which is saved as a ts file. I would like to convert it to an mp4?
1. Missing channels
When starting the drv there is increasingly a message that there are no channels available. I am given no choice but to do a fresh scan for the channels that are available. This is a fairly new problem. Can I do anything about it?
My aerial connection is poor. The coax...
I was watching Click at the same time as the recorder had been set to record it. No problem watching the live broadcast but the recording failed: unable to track program.
What can I do about preventing this fault?
Can you please refer me to where there are the instructions to enable youtube-dl?
Is there a package that ensures that when a channel update occurs only the favorites are installed? (The idea is to avoid setting up the favorites every time there is a channel update. I thought there was a...
My HDR-fox t2 is crashing as soon as it starts up from cold. It then counts down 10 secs and crashes again. This cycle continues without a pause. I found this advice in our forums:
https://hummy.tv/forum/threads/steps-for-resolving-hdr-fox-crash-reboot-issues.5320/
As I can not access the...
My Fox T2 has media tomb installed. It seems to only show the file structure of the T2 linux operating system. I therefore can not pick up files in other places on the Lan. The wish is to play them on my TV and to control them via my remote as the computer with the HD is in another room. I...
When I come to replay I am finding consistently that there are no bookmarks in the recording
My settings are:
Automatically process recording following auto-decryption? (traditional)
Only BBC* excluded from processing
Start processing recording queue ASAP
Only Bookmark ends of ad breaks? YES...
Is there any app or technique to prevent all my program list reverting to the full list when there is a rescan of the stations?
I am hoping that I can save my list of stations appearing in the Humax guide so that I can restore the list after new stations are included. When that happens the...
I have run the disk diags through the main menu and smart status was passed. The firmware v- sc13
I have also run the Disk Maintenance through telnet. All was ok (after running the maintenance utilities) except for /mnt/hd2/mod/tmp/redring.log, which it was suggested I may wish to delete.
RM...
I have checked the app updates and there no available updates for my apps on the HDR-Fox T2.
I have the detectadds working all the time on channels that have adverts. I find that when I fast forward on a recording cleaned by DetectAdds The time line shows me moving froward with the fast...
I can access the Humax via the web interface and have run some of the diags including resetnew. None have made any difference.
What should I do to be able to edit channels or access installation from the Humax menu? At present they are both greyed out.
It seems I had a crash, according to an...
I have set up my Ubuntu 14.04 HD 64bit lan as the network storage source. I have a number of MP4, avi, and webm type files in the network storage location but none of them can be seen from the T2. I have checked the access rights to the files and they are:
Anyone can view the content...
I am trying to install the Modified Firmware for hrd fox t2.
The USB flash drive I am using for the hdr_fox_T2_Upgrade.hdf is formatted to Fat32 and is 1gb. The file manager shows no files on it other than the hdf. I have followed the instructions to install but the T2 does not boot off the...
I am now facing a new problem in that the Fox-HDR T2 goes through the procedure but does not find any stations when I do a station search. This results in no channels to play on the Humax and so the Humax can not be used to watch the TV or recordings.
If I take the aerial jack in to the Fox...
I have noticed that none of my scheduled recordings are appearing as available to view nor are they listed as being made.
Upon access via browser:
Warning HD problems /mnt/hd2 =RO
Access via telnet:
Connection refused
Space reported on HD:
Total 906GiB...
DetectAdds is not detecting and removing via chaserun all channels I have retained:
Retained channels:
Yesterday, Earthxtv, PBS America, AlJazeera eng (BBC, of course no adds to remove.)
Is DetectAds capable of removing adds from my retained channels?
I believe that the share file should...
Because I have disk problems, I have been advised in another forum, to install the customised firmware. I do not know if I have to install a later version than the one that is installed..
How do I check which version is installed?
I am unable to directly access the recorder via the lan.
As a fault-finding check I removed the Fox from its usual position in another room, and connected the Fox recorder directly to a switch box attached to my computer using a different IP cable. Amongst the device addresses shown in the...
I run ubuntu 22.04. Does anyone know how to convert a file that has been downloaded from the DVR and which is saved as a ts file. I would like to convert it to an mp4?
1. Missing channels
When starting the drv there is increasingly a message that there are no channels available. I am given no choice but to do a fresh scan for the channels that are available. This is a fairly new problem. Can I do anything about it?
My aerial connection is poor. The coax...
I was watching Click at the same time as the recorder had been set to record it. No problem watching the live broadcast but the recording failed: unable to track program.
What can I do about preventing this fault?
Can you please refer me to where there are the instructions to enable youtube-dl?
Is there a package that ensures that when a channel update occurs only the favorites are installed? (The idea is to avoid setting up the favorites every time there is a channel update. I thought there was a...
My HDR-fox t2 is crashing as soon as it starts up from cold. It then counts down 10 secs and crashes again. This cycle continues without a pause. I found this advice in our forums:
https://hummy.tv/forum/threads/steps-for-resolving-hdr-fox-crash-reboot-issues.5320/
As I can not access the...
My Fox T2 has media tomb installed. It seems to only show the file structure of the T2 linux operating system. I therefore can not pick up files in other places on the Lan. The wish is to play them on my TV and to control them via my remote as the computer with the HD is in another room. I...
When I come to replay I am finding consistently that there are no bookmarks in the recording
My settings are:
Automatically process recording following auto-decryption? (traditional)
Only BBC* excluded from processing
Start processing recording queue ASAP
Only Bookmark ends of ad breaks? YES...
Is there any app or technique to prevent all my program list reverting to the full list when there is a rescan of the stations?
I am hoping that I can save my list of stations appearing in the Humax guide so that I can restore the list after new stations are included. When that happens the...
I have run the disk diags through the main menu and smart status was passed. The firmware v- sc13
I have also run the Disk Maintenance through telnet. All was ok (after running the maintenance utilities) except for /mnt/hd2/mod/tmp/redring.log, which it was suggested I may wish to delete.
RM...
I have checked the app updates and there no available updates for my apps on the HDR-Fox T2.
I have the detectadds working all the time on channels that have adverts. I find that when I fast forward on a recording cleaned by DetectAdds The time line shows me moving froward with the fast...
I can access the Humax via the web interface and have run some of the diags including resetnew. None have made any difference.
What should I do to be able to edit channels or access installation from the Humax menu? At present they are both greyed out.
It seems I had a crash, according to an...
I have set up my Ubuntu 14.04 HD 64bit lan as the network storage source. I have a number of MP4, avi, and webm type files in the network storage location but none of them can be seen from the T2. I have checked the access rights to the files and they are:
Anyone can view the content...
I am trying to install the Modified Firmware for hrd fox t2.
The USB flash drive I am using for the hdr_fox_T2_Upgrade.hdf is formatted to Fat32 and is 1gb. The file manager shows no files on it other than the hdf. I have followed the instructions to install but the T2 does not boot off the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.